[open-ils-commits] [GIT] Evergreen ILS branch master updated. 2f47631078a92b306abbe5f0ff77767836c51c43

Thu Jun 18 00:03:02 EDT 2015

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Evergreen ILS".

The branch, master has been updated
       via  2f47631078a92b306abbe5f0ff77767836c51c43 (commit)
      from  c888fde19357f690b47966b108f97e602f5f9617 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 2f47631078a92b306abbe5f0ff77767836c51c43
Author: Ben Shum <bshum at biblio.org>
Date:   Thu Jun 18 00:02:09 2015 -0400

    Docs: Change references to release 2.8.2 for server upgrade
    
    Since 2.8.2 is released, change references in upgrade docs to this newest
    release.
    
    Signed-off-by: Ben Shum <bshum at biblio.org>

diff --git a/docs/installation/server_upgrade.txt b/docs/installation/server_upgrade.txt
index d6c0d97..485c88d 100644
--- a/docs/installation/server_upgrade.txt
+++ b/docs/installation/server_upgrade.txt
@@ -48,8 +48,8 @@ the http://evergreen-ils.org/opensrf-downloads/[OpenSRF download page].
 +
 [source, bash]
 -----------------------------------------------
-wget http://evergreen-ils.org/downloads/Evergreen-ILS-2.8.1.tar.gz
-tar xzf Evergreen-ILS-2.8.1.tar.gz
+wget http://evergreen-ils.org/downloads/Evergreen-ILS-2.8.2.tar.gz
+tar xzf Evergreen-ILS-2.8.2.tar.gz
 -----------------------------------------------
 +
 [NOTE]
@@ -59,7 +59,7 @@ For the latest edition of Evergreen, check the http://evergreen-ils.org/egdownlo
 +
 [source, bash]
 ---------------------------------------------
-cd /home/opensrf/Evergreen-ILS-2.8.1
+cd /home/opensrf/Evergreen-ILS-2.8.2
 ---------------------------------------------
 +
 On the next command, replace `[distribution]` with one of these values for your
@@ -85,7 +85,7 @@ make -f Open-ILS/src/extras/Makefile.install [distribution]
 +
 [source, bash]
 ------------------------------------------------------------
-cd /home/opensrf/Evergreen-ILS-2.8.1
+cd /home/opensrf/Evergreen-ILS-2.8.2
 PATH=/openils/bin:$PATH ./configure --prefix=/openils --sysconfdir=/openils/conf
 make
 ------------------------------------------------------------
@@ -96,8 +96,8 @@ These instructions assume that you have also installed OpenSRF under /openils/.
 +
 [source, bash]
 ------------------------------------------------------------
-cd /home/opensrf/Evergreen-ILS-2.8.1
-make STAFF_CLIENT_STAMP_ID=rel_2_8_1 install
+cd /home/opensrf/Evergreen-ILS-2.8.2
+make STAFF_CLIENT_STAMP_ID=rel_2_8_2 install
 ------------------------------------------------------------
 +
 . As the *root* user, change all files to be owned by the opensrf user and group:
@@ -113,7 +113,7 @@ chown -R opensrf:opensrf /openils
 -----------------------------------------------------------
 cd /openils/var/web/xul/
 rm server
-ln -sf rel_2_8_1/server server
+ln -sf rel_2_8_2/server server
 ----------------------------------------------------------
 +
 . As the *opensrf* user, update opensrf_core.xml and opensrf.xml by copying the
@@ -133,7 +133,7 @@ Copying these configuration files will remove any customizations you have made t
 +
 [source, bash]
 -------------------------------------------------------------------------
-cd /home/opensrf/Evergreen-ILS-2.8.1
+cd /home/opensrf/Evergreen-ILS-2.8.2
 perl Open-ILS/src/support-scripts/eg_db_config --update-config --service all \
 --create-offline --database evergreen --host localhost --user evergreen --password evergreen
 -------------------------------------------------------------------------
@@ -157,21 +157,21 @@ The diff command can be used to show the differences between the distribution ve
 +
 [source, bash]
 ----------------------------------------------------------
-cp /home/opensrf/Evergreen-ILS-2.8.1/Open-ILS/examples/apache/eg_startup /etc/apache2/eg_startup
+cp /home/opensrf/Evergreen-ILS-2.8.2/Open-ILS/examples/apache/eg_startup /etc/apache2/eg_startup
 ----------------------------------------------------------
 +
 .. Update /etc/apache2/eg_vhost.conf by copying the example from Open-ILS/examples/apache/eg_vhost.conf.
 +
 [source, bash]
 ----------------------------------------------------------
-cp /home/opensrf/Evergreen-ILS-2.8.1/Open-ILS/examples/apache/eg_vhost.conf /etc/apache2/eg_vhost.conf
+cp /home/opensrf/Evergreen-ILS-2.8.2/Open-ILS/examples/apache/eg_vhost.conf /etc/apache2/eg_vhost.conf
 ----------------------------------------------------------
 +
 .. Update /etc/apache2/sites-available/eg.conf by copying the example from Open-ILS/examples/apache/eg.conf.
 +
 [source, bash]
 ----------------------------------------------------------
-cp /home/opensrf/Evergreen-ILS-2.8.1/Open-ILS/examples/apache/eg.conf /etc/apache2/sites-available/eg.conf
+cp /home/opensrf/Evergreen-ILS-2.8.2/Open-ILS/examples/apache/eg.conf /etc/apache2/sites-available/eg.conf
 ----------------------------------------------------------
 
 Upgrade the Evergreen database schema
@@ -194,7 +194,7 @@ anything goes wrong during the upgrade.
 =============
 Evergreen provides incremental upgrade scripts that allow you to upgrade
 from one minor version to the next until you have the current version of
-the schema. For example, if you want to upgrade from 2.5.1 to 2.8.1, you
+the schema. For example, if you want to upgrade from 2.5.1 to 2.8.2, you
 would run the following upgrade scripts:
 
 - 2.5.1-2.5.2-upgrade-db.sql
@@ -208,13 +208,14 @@ would run the following upgrade scripts:
 - 2.7.3-2.7.4-upgrade-db.sql
 - 2.7.4-2.8.0-upgrade-db.sql (this is a major version upgrade)
 - 2.8.0-2.8.1-upgrade-db.sql
+- 2.8.1-2.8.2-upgrade-db.sql
 
 Note that you do *not* want to run additional 2.5 scripts to upgrade to the
 newest version of 2.5, since currently there is no automated way to upgrade
 from 2.5.4+ to 2.6. Only upgrade as far as necessary to reach the major
 version upgrade script (in this example, as far as 2.5.3).
 
-To upgrade across multiple major versions (e.g. from 2.3.0 to 2.8.1), use
+To upgrade across multiple major versions (e.g. from 2.3.0 to 2.8.2), use
 the same logic to utilize the provided major version upgrade scripts. For
 example:
 
@@ -228,7 +229,7 @@ example:
 - 2.6.3-2.7.0-upgrade-db.sql
 - (run all incremental scripts from 2.7.0 to 2.7.4)
 - 2.7.4-2.8.0-upgrade-db.sql
-- (run all incremental scripts from 2.8.0 to 2.8.1)
+- (run all incremental scripts from 2.8.0 to 2.8.2)
 =============
 
 [CAUTION]
@@ -242,7 +243,7 @@ as a user with the ability to connect to the database server.
 
 [source, bash]
 ----------------------------------------------------------
-cd /home/opensrf/Evergreen-ILS-2.8.1/Open-ILS/src/sql/Pg
+cd /home/opensrf/Evergreen-ILS-2.8.2/Open-ILS/src/sql/Pg
 psql -U evergreen -h localhost -f version-upgrade/2.7.4-2.8.0-upgrade-db.sql evergreen
 ----------------------------------------------------------
 

-----------------------------------------------------------------------

Summary of changes:
 docs/installation/server_upgrade.txt |   31 ++++++++++++++++---------------
 1 files changed, 16 insertions(+), 15 deletions(-)


hooks/post-receive
-- 
Evergreen ILS
