[open-ils-commits] [GIT] Evergreen ILS branch tags/rel_2_11_7 created. 2b084030bfc6c303480f6f4b2e0bc922f1aabb6e
Evergreen Git
git at git.evergreen-ils.org
Thu Jul 27 17:19:00 EDT 2017
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Evergreen ILS".
The branch, tags/rel_2_11_7 has been created
at 2b084030bfc6c303480f6f4b2e0bc922f1aabb6e (commit)
- Log -----------------------------------------------------------------
commit 2b084030bfc6c303480f6f4b2e0bc922f1aabb6e
Author: Dan Wells <dbw2 at calvin.edu>
Date: Thu Jul 27 16:21:13 2017 -0400
Bumping version numbers, adding Upgrade Script and Changelog
Signed-off-by: Dan Wells <dbw2 at calvin.edu>
diff --git a/ChangeLog b/ChangeLog
index 1f72b2c..d47d3ed 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,235 @@
-Evergreen doesn't keep a GNU-style ChangeLog except in release tarballs.
-Those seeking a change log are encouraged to run 'git log -v', or read
-it online at: http://git.evergreen-ils.org/?p=Evergreen.git;a=log
+commit 75829bd468738ad5441083bad7d63794d6417bf3
+Author: Dan Wells <dbw2 at calvin.edu>
+Date: Mon Feb 24 12:09:57 2014 -0500
+
+ Bump OpenILS.pm version
+
+ Signed-off-by: Dan Wells <dbw2 at calvin.edu>
+
+1 1 Open-ILS/src/perlmods/lib/OpenILS.pm
+
+commit 4e2582ba79133d72a5e47ebb9be4be0e22e6b467
+Author: Kathy Lussier <klussier at masslnc.org>
+Date: Wed Jul 26 17:21:00 2017 -0400
+
+ Docs: Release notes for 2.11.7
+
+ Signed-off-by: Kathy Lussier <klussier at masslnc.org>
+
+40 0 docs/RELEASE_NOTES_2_11.adoc
+
+commit f79f727e77096d1bf760c733d88f6a3e4bc97e2f
+Author: Mike Rylander <mrylander at gmail.com>
+Date: Tue Feb 14 15:59:53 2017 -0500
+
+ LP#1664715: Hold ratio template ignores some copies
+
+ The relatively new report template "Hold/Copy Ratio per Bib and Pickup Library
+ (and Descendants)" only includes copies that are at locations that are
+ actually pickup libraries of holds. For instance, if you have two branches (A
+ and B) in a system, each with 10 copies attached to a bib, but a hold only at
+ branch A, the ratio calculated at the system level sees 10 copies rather than
+ twenty. This has the effect of inflating the hold side of the hold/copy ratio.
+
+ The SQL definition is adjusted here to count copies across the entire branch
+ of the org tree per bib, rather than through a join that restricts to those
+ branches that are pickup libraries for a relevant hold.
+
+ Upgrade note: Report templates using the Hold/Copy Ratio at Pickup Library
+ and Descendants data source will need to be re-created to benefit from this
+ bug fix.
+
+ Signed-off-by: Mike Rylander <mrylander at gmail.com>
+ Signed-off-by: Josh Stompro <stomproj at larl.org>
+ Signed-off-by: Kathy Lussier <klussier at masslnc.org>
+
+20 20 Open-ILS/examples/fm_IDL.xml
+
+commit e2d669c6044c5e99ac5fc07f4aff09d2e3b134dd
+Author: Jeff Davis <jdavis at sitka.bclibraries.ca>
+Date: Tue May 9 14:17:29 2017 -0700
+
+ LP#1689656: Adjust to zero on negative balance
+
+ Adjust to zero was not actually adjusting to zero on negative balances
+ in at least some cases. This patch corrects that behavior.
+
+ Test plan:
+
+ [1] Generate multiple overdue billings on an overdue circ.
+ [2] Apply a payment (cash or forgive) to resolve the overdue billings.
+ [3] Checkin the item using backdated checkin or amnesty mode, such that
+ the overdue billings are automatically voided, resulting in a
+ negative balance.
+ [4] Adjust to zero. A single new manual adjustment billing is created,
+ reinstating one overdue billing, and then the adjust-to-zero process
+ exits. The negative balance has been reduced by the amount of one
+ overdue billing, rather than being fully adjusted to zero.
+ [5] Apply the patch and restart services.
+ [6] Repeat steps 1-3 with a new circulation.
+ [7] Adjust to zero. This time, the balance should be correctly adjusted
+ to zero, instead of exiting prematurely with an outstanding
+ negative balance.
+
+ Signed-off-by: Jeff Davis <jdavis at sitka.bclibraries.ca>
+ Signed-off-by: Dan Wells <dbw2 at calvin.edu>
+
+1 1 Open-ILS/src/perlmods/lib/OpenILS/Application/Circ/Money.pm
+
+commit cf50371f21d776bb9d5295e0567627b589adb121
+Author: Dan Wells <dbw2 at calvin.edu>
+Date: Thu Jul 20 18:10:15 2017 -0400
+
+ LP#1689656 Add test for manual adjustment of negative balance
+
+ Without the fix in LP#1689656, this test fails.
+
+ Signed-off-by: Dan Wells <dbw2 at calvin.edu>
+
+18 1 Open-ILS/src/perlmods/live_t/09-lp1198465_neg_balances.t
+
+commit f9e6c48d1b9db43b21216d31b3a565c8ec27bb8e
+Author: Kathy Lussier <klussier at masslnc.org>
+Date: Tue Jul 11 13:08:23 2017 -0400
+
+ LP#1486451: Remove rdetails_status nowrap style
+
+ The copy details table was styled to not wrap, which sometimes pushed table
+ contents off the page, particularly when some of the copies are conjoined
+ items. This commit removes the style that was preventing wrapping.
+
+ Test plan:
+ Load record 15 in the Concerto dataset. Before the patch is loaded, you'll
+ see that some of the content in the copy details table is pushed off the
+ screen and requires horizontal scrolling. Post-patch, all of the copy
+ details will display on screen without horizontal scrolling. In addition
+ to the change in the Conjoined Items, you also might see some text wrapping
+ in the Shelving Location and Status columns.
+
+ Signed-off-by: Kathy Lussier <klussier at masslnc.org>
+ Signed-off-by: Terran McCanna <tmccanna at georgialibraries.org>
+ Signed-off-by: Galen Charlton <gmc at equinoxinitiative.org>
+
+ Conflicts:
+ Open-ILS/src/templates/opac/css/style.css.tt2
+
+0 1 Open-ILS/src/templates/opac/css/style.css.tt2
+
+commit 24edd83b6c7ea4961aeeb5b1d2bf4a0becc1b142
+Author: Jason Etheridge <jason at EquinoxInitiative.org>
+Date: Tue Jan 17 16:39:58 2017 -0500
+
+ Fix Can't locate object method "workstation" error
+
+ When trying to utilize the Recall functionality, Evergreen would fail to update
+ targeted circulations (truncate the due date, etc.) In the logs, we would have
+ an error like this:
+
+ [] open-ils.storage [ERR ::action.pm:1597:] Processing of hold failed:
+ Can't locate object method "workstation" via package "action::circulation" at
+ /usr/local/share/perl/5.14.2/OpenILS/Application/Storage/CDBI.pm line 181.
+
+ We first tried adding the workstation column to Storage/CDBI/action.pm, but a
+ similar message would then appear instead: Can't locate object method
+ "checkin_workstation"
+
+ This sidesteps the problem entirely.
+
+ Thanks to Mike for the solution!
+
+ Signed-off-by: Jason Etheridge <jason at EquinoxInitiative.org>
+ Signed-off-by: Mike Rylander <mrylander at gmail.com>
+
+1 1 Open-ILS/src/perlmods/lib/OpenILS/Application/Storage/CDBI.pm
+
+commit 244e76a10c47cbd1a7d8a932be635eb31d0d54e7
+Author: Galen Charlton <gmc at equinoxinitiative.org>
+Date: Mon May 15 14:01:52 2017 -0400
+
+ LP#1205190: more CSS tweaks
+
+ * replace a few more "background" with "background-color"
+
+ Signed-off-by: Galen Charlton <gmc at equinoxinitiative.org>
+ Signed-off-by: Mike Rylander <mrylander at gmail.com>
+
+5 5 Open-ILS/src/templates/opac/css/style.css.tt2
+
+commit 1c7b75a849ba3b4860e623a1df4376b7f88b5601
+Author: Dan Scott <dan at coffeecode.net>
+Date: Fri Jul 26 00:05:49 2013 -0400
+
+ LP#1205190: TPAC: Improve style.css to reduce warnings
+
+ * Improve specificity: use background-image (for gradients) or
+ background-color (for color) instead of just background, because we
+ are only specifying the image or color, and not the rest of the
+ background properties.
+ * Declare the background-color first, followed by the background-images;
+ these will only override if recognized by the browser.
+ * Declare the standard (unprefixed) CSS linear-gradient last to prevent
+ prefixed browser quirk versions from overriding the standardized form.
+ * Remove the -moz- prefix from -moz-border-radius as that has not been
+ supported by Gecko since Firefox 13.0; just plain border-radius now.
+ * Fix bad selector ##rdetail_extras_expand (only one #, please).
+
+ Signed-off-by: Dan Scott <dan at coffeecode.net>
+ Signed-off-by: Pasi Kallinen <pasi.kallinen at pttk.fi>
+ Signed-off-by: Galen Charlton <gmc at equinoxinitiative.org>
+
+ Conflicts:
+ Open-ILS/src/templates/opac/css/style.css.tt2
+
+ Signed-off-by: Galen Charlton <gmc at equinoxinitiative.org>
+
+ Conflicts:
+ Open-ILS/src/templates/opac/css/style.css.tt2
+
+ Signed-off-by: Mike Rylander <mrylander at gmail.com>
+
+62 49 Open-ILS/src/templates/opac/css/style.css.tt2
+
+commit 6b374ae95dd95fea3688b9067bba06289040b0a3
+Author: Pasi Kallinen <pasi.kallinen at pttk.fi>
+Date: Thu Aug 1 11:21:17 2013 +0300
+
+ LP#1205190: quiet some CSS Mozilla extensions warnings.
+
+ * -moz-dialog-text is actually -moz-dialogtext
+ * -moz-outline is deprecated, use outline
+ * -moz-border-radius has been removed, use border-radius
+ * -moz-border-radius-topleft (etc) are now border-top-left-radius
+ * Fix some other CSS errors.
+
+ Signed-off-by: Pasi Kallinen <pasi.kallinen at pttk.fi>
+ Signed-off-by: Galen Charlton <gmc at equinoxinitiative.org>
+
+ Conflicts:
+ Open-ILS/src/templates/opac/css/style.css.tt2
+ Open-ILS/web/css/skin/default/register.css
+ Open-ILS/web/opac/skin/default/xml/home/homesearch.xml
+ Open-ILS/web/reports/oils_rpt.css
+ Open-ILS/xul/staff_client/server/admin/org_unit_settings.xhtml
+ Open-ILS/xul/staff_client/server/serial/notes.xul
+ Open-ILS/xul/staff_client/server/skin/circ.css
+
+0 3 Open-ILS/src/templates/opac/css/style.css.tt2
+0 1 Open-ILS/web/css/skin/default/selfcheck.css
+1 1 Open-ILS/web/opac/extras/slimpac/advanced.html
+1 1 Open-ILS/web/opac/extras/slimpac/start.html
+3 3 Open-ILS/web/opac/skin/default/css/layout.css
+1 1 Open-ILS/web/reports/oils_rpt.css
+19 19 Open-ILS/xul/staff_client/chrome/skin/browser.css
+1 5 Open-ILS/xul/staff_client/server/admin/org_unit_settings.xhtml
+8 8 Open-ILS/xul/staff_client/server/skin/circ.css
+
+commit 5d5296529109d922ac983f0e8c6b6cfa72128e9d
+Author: Dan Wells <dbw2 at calvin.edu>
+Date: Wed Jun 21 17:52:36 2017 -0400
+
+ Forward-port 2.11.6 upgrade script
+
+ Signed-off-by: Dan Wells <dbw2 at calvin.edu>
+
+5 0 Open-ILS/src/sql/Pg/version-upgrade/2.11.5-2.11.6-upgrade-db.sql
+ create mode 100644 Open-ILS/src/sql/Pg/version-upgrade/2.11.5-2.11.6-upgrade-db.sql
diff --git a/Open-ILS/src/perlmods/lib/OpenILS/Application.pm b/Open-ILS/src/perlmods/lib/OpenILS/Application.pm
index d750216..ec73c56 100644
--- a/Open-ILS/src/perlmods/lib/OpenILS/Application.pm
+++ b/Open-ILS/src/perlmods/lib/OpenILS/Application.pm
@@ -7,7 +7,7 @@ use OpenILS::Utils::Fieldmapper;
sub ils_version {
# version format is "x-y-z", for example "2-0-0" for Evergreen 2.0.0
# For branches, format is "x-y"
- return "HEAD";
+ return "2-11-7";
}
__PACKAGE__->register_method(
diff --git a/Open-ILS/src/sql/Pg/002.schema.config.sql b/Open-ILS/src/sql/Pg/002.schema.config.sql
index 5459930..0eaa61a 100644
--- a/Open-ILS/src/sql/Pg/002.schema.config.sql
+++ b/Open-ILS/src/sql/Pg/002.schema.config.sql
@@ -92,6 +92,7 @@ CREATE TRIGGER no_overlapping_deps
FOR EACH ROW EXECUTE PROCEDURE evergreen.array_overlap_check ('deprecates');
INSERT INTO config.upgrade_log (version, applied_to) VALUES ('1040', :eg_version); --gmcharlt/berick
+INSERT INTO config.upgrade_log (version, applied_to) VALUES ('2.11.7', :eg_version);
CREATE TABLE config.bib_source (
id SERIAL PRIMARY KEY,
diff --git a/Open-ILS/src/sql/Pg/version-upgrade/2.11.6-2.11.7-upgrade-db.sql b/Open-ILS/src/sql/Pg/version-upgrade/2.11.6-2.11.7-upgrade-db.sql
new file mode 100644
index 0000000..b7e50b4
--- /dev/null
+++ b/Open-ILS/src/sql/Pg/version-upgrade/2.11.6-2.11.7-upgrade-db.sql
@@ -0,0 +1,5 @@
+--Upgrade Script for 2.11.6 to 2.11.7
+\set eg_version '''2.11.7'''
+BEGIN;
+INSERT INTO config.upgrade_log (version, applied_to) VALUES ('2.11.7', :eg_version);
+COMMIT;
diff --git a/Open-ILS/xul/staff_client/chrome/content/main/about.html b/Open-ILS/xul/staff_client/chrome/content/main/about.html
index 7b2b3f5..d283c58 100644
--- a/Open-ILS/xul/staff_client/chrome/content/main/about.html
+++ b/Open-ILS/xul/staff_client/chrome/content/main/about.html
@@ -1,7 +1,7 @@
<html><head><script></script></head><body onload="var x = document.getElementById('version'); var version ='/xul/server/'.split(/\//)[2]; if (version == 'server') { version = 'versionless debug build'; } x.appendChild(document.createTextNode(version));">
<h1 style="text-decoration: underline">Evergreen</h1>
<p>Target Server ID: <span id="version"></span></p>
-<p>$HeadURL$</p>
+<p>http://git.evergreen-ils.org/?p=Evergreen.git;a=shortlog;h=refs/heads/tags/rel_2_11_7</p>
<h2>What is Evergreen?</h2>
<blockquote>
<p>
diff --git a/Open-ILS/xul/staff_client/defaults/preferences/prefs.js b/Open-ILS/xul/staff_client/defaults/preferences/prefs.js
index 0613a13..fcd1d4d 100644
--- a/Open-ILS/xul/staff_client/defaults/preferences/prefs.js
+++ b/Open-ILS/xul/staff_client/defaults/preferences/prefs.js
@@ -11,7 +11,7 @@ pref("toolkit.singletonWindowType", "eg_main");
pref("open-ils.enable_join_tabs", true);
// We'll use this one to help brand some build information into the client, and rely on subversion keywords
-pref("open-ils.repository.headURL","$HeadURL$");
+pref("open-ils.repository.headURL","http://git.evergreen-ils.org/?p=Evergreen.git;a=shortlog;h=refs/heads/tags/rel_2_11_7");
pref("open-ils.repository.author","$Author$");
pref("open-ils.repository.revision","$Revision$");
pref("open-ils.repository.date","$Date$");
diff --git a/Open-ILS/xul/staff_client/windowssetup.nsi b/Open-ILS/xul/staff_client/windowssetup.nsi
index a954357..5ebcd7a 100644
--- a/Open-ILS/xul/staff_client/windowssetup.nsi
+++ b/Open-ILS/xul/staff_client/windowssetup.nsi
@@ -3,7 +3,7 @@
; HM NIS Edit Wizard helper defines
; Old versions of makensis don't like this, moved to Makefile
;!define /file PRODUCT_VERSION "client/VERSION"
-!define PRODUCT_TAG "Master"
+!define PRODUCT_TAG "2.11"
!define PRODUCT_INSTALL_TAG "${PRODUCT_TAG}"
!define UI_IMAGESET "beta"
;!define UI_IMAGESET "release"
diff --git a/README b/README
deleted file mode 120000
index 1ee2103..0000000
--- a/README
+++ /dev/null
@@ -1 +0,0 @@
-docs/installation/server_installation.adoc
\ No newline at end of file
diff --git a/README b/README
new file mode 100644
index 0000000..f0a456e
--- /dev/null
+++ b/README
@@ -0,0 +1,742 @@
+Installing the Evergreen server
+===============================
+:toc:
+:numbered:
+
+Preamble: referenced user accounts
+----------------------------------
+
+In subsequent sections, we will refer to a number of different accounts, as
+follows:
+
+ * Linux user accounts:
+ ** The *user* Linux account is the account that you use to log onto the
+ Linux system as a regular user.
+ ** The *root* Linux account is an account that has system administrator
+ privileges. On Debian and Fedora you can switch to this account from
+ your *user* account by issuing the `su -` command and entering the
+ password for the *root* account when prompted. On Ubuntu you can switch
+ to this account from your *user* account using the `sudo su -` command
+ and entering the password for your *user* account when prompted.
+ ** The *opensrf* Linux account is an account that you create when installing
+ OpenSRF. You can switch to this account from the *root* account by
+ issuing the `su - opensrf` command.
+ ** The *postgres* Linux account is created automatically when you install
+ the PostgreSQL database server. You can switch to this account from the
+ *root* account by issuing the `su - postgres` command.
+ * PostgreSQL user accounts:
+ ** The *evergreen* PostgreSQL account is a superuser account that you will
+ create to connect to the PostgreSQL database server.
+ * Evergreen administrator account:
+ ** The *egadmin* Evergreen account is an administrator account for
+ Evergreen that you will use to test connectivity and configure your
+ Evergreen instance.
+
+Preamble: developer instructions
+--------------------------------
+
+[NOTE]
+Skip this section if you are using an official release tarball downloaded
+from http://evergreen-ils.org/egdownloads
+
+Developers working directly with the source code from the Git repository,
+rather than an official release tarball, must perform one step before they
+can proceed with the `./configure` step.
+
+As the *user* Linux account, issue the following command in the Evergreen
+source directory to generate the configure script and Makefiles:
+
+[source, bash]
+------------------------------------------------------------------------------
+autoreconf -i
+------------------------------------------------------------------------------
+
+Installing prerequisites
+------------------------
+
+ * **PostgreSQL**: Version 9.3 is recommended. The minimum supported version
+ is 9.1.
+ * **Linux**: Evergreen 2.11 has been tested on Debian Jessie (8.0),
+ Debian Wheezy (7.0), Ubuntu Xenial Xerus (16.04),
+ Ubuntu Trusty Tahr (14.04), and Fedora.
+ If you are running an older version of these distributions, you may want
+ to upgrade before upgrading Evergreen. For instructions on upgrading these
+ distributions, visit the Debian, Ubuntu or Fedora websites.
+ * **OpenSRF**: The minimum supported version of OpenSRF is 2.4.0.
+
+
+Evergreen has a number of prerequisite packages that must be installed
+before you can successfully configure, compile, and install Evergreen.
+
+1. Begin by installing the most recent version of OpenSRF (2.4.0 or later).
+ You can download OpenSRF releases from http://evergreen-ils.org/opensrf-downloads/
+2. On some distributions, it is necessary to install PostgreSQL 9.1+ from external
+ repositories.
++
+ * Debian (Wheezy and Jessie) and Ubuntu (Trusty and Xenial) comes with
+ PostgreSQL 9.1+, so no additional steps are required.
+ * Fedora 19 and 20 come with PostgreSQL 9.2+, so no additional steps are required.
++
+3. On Debian and Ubuntu, run `aptitude update` as the *root* Linux account to
+ retrieve the new packages from the backports repository.
+4. Issue the following commands as the *root* Linux account to install
+ prerequisites using the `Makefile.install` prerequisite installer,
+ substituting `debian-jessie`, `debian-wheezy`, `fedora`,
+ `ubuntu-xenial`, or `ubuntu-trusty` for <osname> below:
++
+[source, bash]
+------------------------------------------------------------------------------
+make -f Open-ILS/src/extras/Makefile.install <osname>
+------------------------------------------------------------------------------
++
+5. Add the libdbi-libdbd libraries to the system dynamic library path by
+ issuing the following commands as the *root* Linux account:
++
+[NOTE]
+You should skip this step if installing on Ubuntu Trusty, Ubuntu Xenial or Debian Jessie. The Ubuntu
+and Debian Jessie targets use libdbd-pgsql from packages.
++
+.Debian Wheezy
+[source, bash]
+------------------------------------------------------------------------------
+echo "/usr/local/lib/dbd" > /etc/ld.so.conf.d/eg.conf
+ldconfig
+------------------------------------------------------------------------------
++
+.Fedora
+[source, bash]
+------------------------------------------------------------------------------
+echo "/usr/lib64/dbd" > /etc/ld.so.conf.d/eg.conf
+ldconfig
+------------------------------------------------------------------------------
+
+6. OPTIONAL: Developer additions
++
+To perform certain developer tasks from a Git source code checkout,
+additional packages may be required. As the *root* Linux account:
++
+ * To install packages needed for retrieving and managing web dependencies,
+ use the <osname>-developer Makefile.install target. Currently,
+ this is only needed for building and installing the (preview) browser
+ staff client.
++
+[source, bash]
+------------------------------------------------------------------------------
+make -f Open-ILS/src/extras/Makefile.install <osname>-developer
+------------------------------------------------------------------------------
++
+ * To install packages required for building Evergreen release bundles, use
+ the <osname>-packager Makefile.install target.
++
+[source, bash]
+------------------------------------------------------------------------------
+make -f Open-ILS/src/extras/Makefile.install <osname>-packager
+------------------------------------------------------------------------------
+
+Optional: Extra steps for browser-based staff client
+----------------------------------------------------
+
+[NOTE]
+Skip this entire section if you are using an official release tarball downloaded
+from http://evergreen-ils.org/downloads
+
+[NOTE]
+You make skip the subsection `Install dependencies for browser-based staff client'
+if you are installing on either Debian Jessie, Ubuntu Trusty, or Ubuntu Xenial and you have
+installed the `Optional: Developer Additions' described above. You will still
+need to do the steps in `Install files for browser-based staff client' below.
+
+Install dependencies for browser-based staff client
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+1. Install Node.js. For more information see also:
+ https://github.com/joyent/node/wiki/installation[Node.js Installation]
++
+[source,sh]
+------------------------------------------------------------------------------
+# Go to a temporary directory
+cd /tmp
+
+# Clone the code and checkout the necessary version
+git clone https://github.com/joyent/node.git
+cd node
+git checkout -b v0.10.28 v0.10.28
+
+# set -j to the number of CPU cores on the server + 1
+./configure && make -j2 && sudo make install
+
+# update packages
+% sudo npm update
+------------------------------------------------------------------------------
++
+2. Install Grunt CLI
++
+[source,sh]
+------------------------------------------------------------------------------
+% sudo npm install -g grunt-cli
+------------------------------------------------------------------------------
++
+3. Install Bower
++
+[source,sh]
+------------------------------------------------------------------------------
+% sudo npm install -g bower
+------------------------------------------------------------------------------
+
+Install files for browser-based staff client
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+1. Building, Testing, Minification: The remaining steps all take place within
+ the staff JS web root:
++
+[source,sh]
+------------------------------------------------------------------------------
+cd $EVERGREEN_ROOT/Open-ILS/web/js/ui/default/staff/
+------------------------------------------------------------------------------
++
+2. Install Project-local Dependencies. npm inspects the 'package.json' file
+ for dependencies and fetches them from the Node package network.
++
+[source,sh]
+------------------------------------------------------------------------------
+npm install # fetch Grunt dependencies
+bower install # fetch JS dependencies
+------------------------------------------------------------------------------
++
+3. Run the build script.
++
+[source,sh]
+------------------------------------------------------------------------------
+# build, run tests, concat+minify
+grunt all
+------------------------------------------------------------------------------
+
+
+Configuration and compilation instructions
+------------------------------------------
+
+For the time being, we are still installing everything in the `/openils/`
+directory. From the Evergreen source directory, issue the following commands as
+the *user* Linux account to configure and build Evergreen:
+
+[source, bash]
+------------------------------------------------------------------------------
+PATH=/openils/bin:$PATH ./configure --prefix=/openils --sysconfdir=/openils/conf
+make
+------------------------------------------------------------------------------
+
+These instructions assume that you have also installed OpenSRF under `/openils/`.
+If not, please adjust PATH as needed so that the Evergreen `configure` script
+can find `osrf_config`.
+
+Installation instructions
+-------------------------
+
+1. Once you have configured and compiled Evergreen, issue the following
+ command as the *root* Linux account to install Evergreen, build the server
+ portion of the staff client, and copy example configuration files to
+ `/openils/conf`.
+ Change the value of the `STAFF_CLIENT_STAMP_ID` variable to match the version
+ of the staff client that you will use to connect to the Evergreen server.
++
+[source, bash]
+------------------------------------------------------------------------------
+make STAFF_CLIENT_STAMP_ID=rel_2_11_7 install
+------------------------------------------------------------------------------
++
+2. The server portion of the staff client expects `http://hostname/xul/server`
+ to resolve. Issue the following commands as the *root* Linux account to
+ create a symbolic link pointing to the `server` subdirectory of the server
+ portion of the staff client that we just built using the staff client ID
+ 'rel_name':
++
+[source, bash]
+------------------------------------------------------------------------------
+cd /openils/var/web/xul
+ln -sf rel_name/server server
+------------------------------------------------------------------------------
+
+Change ownership of the Evergreen files
+---------------------------------------
+
+All files in the `/openils/` directory and subdirectories must be owned by the
+`opensrf` user. Issue the following command as the *root* Linux account to
+change the ownership on the files:
+
+[source, bash]
+------------------------------------------------------------------------------
+chown -R opensrf:opensrf /openils
+------------------------------------------------------------------------------
+
+Additional Instructions for Developers
+--------------------------------------
+
+[NOTE]
+Skip this section if you are using an official release tarball downloaded
+from http://evergreen-ils.org/egdownloads
+
+Developers working directly with the source code from the Git repository,
+rather than an official release tarball, need to install the Dojo Toolkit
+set of JavaScript libraries. The appropriate version of Dojo is included in
+Evergreen release tarballs. Developers should install the Dojo 1.3.3 version
+of Dojo by issuing the following commands as the *opensrf* Linux account:
+
+[source, bash]
+------------------------------------------------------------------------------
+wget http://download.dojotoolkit.org/release-1.3.3/dojo-release-1.3.3.tar.gz
+tar -C /openils/var/web/js -xzf dojo-release-1.3.3.tar.gz
+cp -r /openils/var/web/js/dojo-release-1.3.3/* /openils/var/web/js/dojo/.
+------------------------------------------------------------------------------
+
+
+Configure the Apache Web server
+-------------------------------
+
+. Use the example configuration files in `Open-ILS/examples/apache/` (for
+Apache versions below 2.4) or `Open-ILS/examples/apache_24/` (for Apache
+versions 2.4 or greater) to configure your Web server for the Evergreen
+catalog, staff client, Web services, and administration interfaces. Issue the
+following commands as the *root* Linux account:
++
+.Debian Wheezy
+[source,bash]
+------------------------------------------------------------------------------
+cp Open-ILS/examples/apache/eg.conf /etc/apache2/sites-available/
+cp Open-ILS/examples/apache/eg_vhost.conf /etc/apache2/
+cp Open-ILS/examples/apache/eg_startup /etc/apache2/
+# Now set up SSL
+mkdir /etc/apache2/ssl
+cd /etc/apache2/ssl
+------------------------------------------------------------------------------
++
+.Ubuntu Trusty, Ubuntu Xenial, and Debian Jessie
+[source,bash]
+------------------------------------------------------------------------------------
+cp Open-ILS/examples/apache_24/eg_24.conf /etc/apache2/sites-available/eg.conf
+cp Open-ILS/examples/apache_24/eg_vhost_24.conf /etc/apache2/eg_vhost.conf
+cp Open-ILS/examples/apache/eg_startup /etc/apache2/
+# Now set up SSL
+mkdir /etc/apache2/ssl
+cd /etc/apache2/ssl
+------------------------------------------------------------------------------------
++
+.Fedora
+[source,bash]
+------------------------------------------------------------------------------
+cp Open-ILS/examples/apache_24/eg_24.conf /etc/httpd/conf.d/
+cp Open-ILS/examples/apache_24/eg_vhost_24.conf /etc/httpd/eg_vhost.conf
+cp Open-ILS/examples/apache/eg_startup /etc/httpd/
+# Now set up SSL
+mkdir /etc/httpd/ssl
+cd /etc/httpd/ssl
+------------------------------------------------------------------------------
++
+. The `openssl` command cuts a new SSL key for your Apache server. For a
+production server, you should purchase a signed SSL certificate, but you can
+just use a self-signed certificate and accept the warnings in the staff client
+and browser during testing and development. Create an SSL key for the Apache
+server by issuing the following command as the *root* Linux account:
++
+[source,bash]
+------------------------------------------------------------------------------
+openssl req -new -x509 -days 365 -nodes -out server.crt -keyout server.key
+------------------------------------------------------------------------------
++
+. As the *root* Linux account, edit the `eg.conf` file that you copied into
+place.
+ a. To enable access to the offline upload / execute interface from any
+ workstation on any network, make the following change (and note that
+ you *must* secure this for a production instance):
+ * (Apache 2.2): Replace `Allow from 10.0.0.0/8` with `Allow from all`
+ * (Apache 2.4): Replace `Require host 10.0.0.0/8` with `Require all granted`
+ b. (Fedora): Change references from the non-existent `/etc/apache2/` directory
+ to `/etc/httpd/`.
+. Change the user for the Apache server.
+ * (Debian and Ubuntu): As the *root* Linux account, edit
+ `/etc/apache2/envvars`. Change `export APACHE_RUN_USER=www-data` to
+ `export APACHE_RUN_USER=opensrf`.
+ * (Fedora): As the *root* Linux account , edit `/etc/httpd/conf/httpd.conf`.
+ Change `User apache` to `User opensrf`.
+. As the *root* Linux account, configure Apache with KeepAlive settings
+ appropriate for Evergreen. Higher values can improve the performance of a
+ single client by allowing multiple requests to be sent over the same TCP
+ connection, but increase the risk of using up all available Apache child
+ processes and memory.
+ * (Debian and Ubuntu): Edit `/etc/apache2/apache2.conf`.
+ a. Change `KeepAliveTimeout` to `1`.
+ b. Change `MaxKeepAliveRequests` to `100`.
+ * (Fedora): Edit `/etc/httpd/conf/httpd.conf`.
+ a. Change `KeepAliveTimeout` to `1`.
+ b. Change `MaxKeepAliveRequests` to `100`.
+. As the *root* Linux account, configure the prefork module to start and keep
+ enough Apache servers available to provide quick responses to clients without
+ running out of memory. The following settings are a good starting point for a
+ site that exposes the default Evergreen catalogue to the web:
++
+.Debian Wheezy (`/etc/apache2/apache2.conf`) and Fedora (`/etc/httpd/conf/httpd.conf`)
+[source,bash]
+------------------------------------------------------------------------------
+<IfModule mpm_prefork_module>
+ StartServers 15
+ MinSpareServers 5
+ MaxSpareServers 15
+ MaxClients 75
+ MaxRequestsPerChild 500
+</IfModule>
+------------------------------------------------------------------------------
++
+.Ubuntu Trusty, Ubuntu Xenial, Debian Jessie (`/etc/apache2/mods-available/mpm_prefork.conf`)
+[source,bash]
+------------------------------------------------------------------------------
+<IfModule mpm_prefork_module>
+ StartServers 15
+ MinSpareServers 5
+ MaxSpareServers 15
+ MaxRequestWorkers 75
+ MaxConnectionsPerChild 500
+</IfModule>
+------------------------------------------------------------------------------
++
+. (Ubuntu Trusty, Ubuntu Xenial, Debian Jessie) As the *root* user,
+ enable the mpm_prefork module:
++
+[source,bash]
+------------------------------------------------------------------------------
+a2dismod mpm_event
+a2enmod mpm_prefork
+------------------------------------------------------------------------------
++
+. (Fedora): As the *root* Linux account, edit the `/etc/httpd/eg_vhost.conf`
+ file to change references from the non-existent `/etc/apache2/` directory
+ to `/etc/httpd/`.
+. (Debian Wheezy): As the *root* Linux account, enable the Evergreen site:
++
+[source,bash]
+------------------------------------------------------------------------------
+a2dissite default # OPTIONAL: disable the default site (the "It Works" page)
+a2ensite eg.conf
+------------------------------------------------------------------------------
++
+(Ubuntu Trusty, Ubuntu Xenial, Debian Jessie):
++
+[source,bash]
+------------------------------------------------------------------------------
+a2dissite 000-default # OPTIONAL: disable the default site (the "It Works" page)
+a2ensite eg.conf
+------------------------------------------------------------------------------
++
+. (Debian and Ubuntu): As the *root* Linux account, enable Apache to write
+ to the lock directory; this is currently necessary because Apache
+ is running as the `opensrf` user:
++
+[source,bash]
+------------------------------------------------------------------------------
+chown opensrf /var/lock/apache2
+------------------------------------------------------------------------------
+
+Learn more about additional Apache options in the following sections:
+
+ * <<_apache_rewrite_tricks,Apache Rewrite Tricks>>
+ * <<_apache_access_handler_perl_module,Apache Access Handler Perl Module>>
+
+Configure OpenSRF for the Evergreen application
+-----------------------------------------------
+There are a number of example OpenSRF configuration files in `/openils/conf/`
+that you can use as a template for your Evergreen installation. Issue the
+following commands as the *opensrf* Linux account:
+
+[source, bash]
+------------------------------------------------------------------------------
+cp -b /openils/conf/opensrf_core.xml.example /openils/conf/opensrf_core.xml
+cp -b /openils/conf/opensrf.xml.example /openils/conf/opensrf.xml
+------------------------------------------------------------------------------
+
+When you installed OpenSRF, you created four Jabber users on two
+separate domains and edited the `opensrf_core.xml` file accordingly. Please
+refer back to the OpenSRF README and, as the *opensrf* Linux account, edit the
+Evergreen version of the `opensrf_core.xml` file using the same Jabber users
+and domains as you used while installing and testing OpenSRF.
+
+[NOTE]
+The `-b` flag tells the `cp` command to create a backup version of the
+destination file. The backup version of the destination file has a tilde (`~`)
+appended to the file name, so if you have forgotten the Jabber users and
+domains, you can retrieve the settings from the backup version of the files.
+
+`eg_db_config`, described in <<_creating_the_evergreen_database,Creating the Evergreen
+database>>, sets the database connection information in `opensrf.xml` for you.
+
+Configure action triggers for the Evergreen application
+-------------------------------------------------------
+_Action Triggers_ provide hooks for the system to perform actions when a given
+event occurs; for example, to generate reminder or overdue notices, the
+`checkout.due` hook is processed and events are triggered for potential actions
+if there is no checkin time.
+
+To enable the default set of hooks, issue the following command as the
+*opensrf* Linux account:
+
+[source, bash]
+------------------------------------------------------------------------------
+cp -b /openils/conf/action_trigger_filters.json.example /openils/conf/action_trigger_filters.json
+------------------------------------------------------------------------------
+
+For more information about configuring and using action triggers, see
+<<_notifications_action_triggers,Notifications / Action Triggers>>.
+
+Creating the Evergreen database
+-------------------------------
+
+Setting up the PostgreSQL server
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For production use, most libraries install the PostgreSQL database server on a
+dedicated machine. Therefore, by default, the `Makefile.install` prerequisite
+installer does *not* install the PostgreSQL 9 database server that is required
+by every Evergreen system. You can install the packages required by Debian or
+Ubuntu on the machine of your choice using the following commands as the
+*root* Linux account:
+
+.(Debian / Ubuntu / Fedora) Installing PostgreSQL server packages
+
+Each OS build target provides the postgres server installation packages
+required for each operating system. To install Postgres server packages,
+use the make target 'postgres-server-<OSTYPE>'. Choose the most appropriate
+command below based on your operating system.
+
+[source, bash]
+------------------------------------------------------------------------------
+make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-jessie
+make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-wheezy
+make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-trusty
+make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-xenial
+make -f Open-ILS/src/extras/Makefile.install postgres-server-fedora
+------------------------------------------------------------------------------
+
+.(Fedora) Postgres initialization
+
+Installing Postgres on Fedora also requires you to initialize the PostgreSQL
+cluster and start the service. Issue the following commands as the *root* user:
+
+[source, bash]
+------------------------------------------------------------------------------
+postgresql-setup initdb
+systemctl start postgresql
+------------------------------------------------------------------------------
+
+For a standalone PostgreSQL server, install the following Perl modules for your
+distribution as the *root* Linux account:
+
+.(Debian Wheezy, Ubuntu Trusty, and Ubuntu Xenial)
+No extra modules required for these distributions.
+
+.(Fedora)
+[source, bash]
+------------------------------------------------------------------------------
+cpan Rose::URI
+------------------------------------------------------------------------------
+
+You need to create a PostgreSQL superuser to create and access the database.
+Issue the following command as the *postgres* Linux account to create a new
+PostgreSQL superuser named `evergreen`. When prompted, enter the new user's
+password:
+
+[source, bash]
+------------------------------------------------------------------------------
+createuser -s -P evergreen
+------------------------------------------------------------------------------
+
+.Enabling connections to the PostgreSQL database
+
+Your PostgreSQL database may be configured by default to prevent connections,
+for example, it might reject attempts to connect via TCP/IP or from other
+servers. To enable TCP/IP connections from localhost, check your `pg_hba.conf`
+file, found in the `/etc/postgresql/` directory on Debian and Ubuntu, and in
+the `/var/lib/pgsql/data/` directory on Fedora. A simple way to enable TCP/IP
+connections from localhost to all databases with password authentication, which
+would be suitable for a test install of Evergreen on a single server, is to
+ensure the file contains the following entries _before_ any "host ... ident"
+entries:
+
+------------------------------------------------------------------------------
+host all all ::1/128 md5
+host all all 127.0.0.1/32 md5
+------------------------------------------------------------------------------
+
+When you change the `pg_hba.conf` file, you will need to reload PostgreSQL to
+make the changes take effect. For more information on configuring connectivity
+to PostgreSQL, see
+http://www.postgresql.org/docs/devel/static/auth-pg-hba-conf.html
+
+Creating the Evergreen database and schema
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Once you have created the *evergreen* PostgreSQL account, you also need to
+create the database and schema, and configure your configuration files to point
+at the database server. Issue the following command as the *root* Linux account
+from inside the Evergreen source directory, replacing <user>, <password>,
+<hostname>, <port>, and <dbname> with the appropriate values for your
+PostgreSQL database (where <user> and <password> are for the *evergreen*
+PostgreSQL account you just created), and replace <admin-user> and <admin-pass>
+with the values you want for the *egadmin* Evergreen administrator account:
+
+[source, bash]
+------------------------------------------------------------------------------
+perl Open-ILS/src/support-scripts/eg_db_config --update-config \
+ --service all --create-database --create-schema --create-offline \
+ --user <user> --password <password> --hostname <hostname> --port <port> \
+ --database <dbname> --admin-user <admin-user> --admin-pass <admin-pass>
+------------------------------------------------------------------------------
+
+This creates the database and schema and configures all of the services in
+your `/openils/conf/opensrf.xml` configuration file to point to that database.
+It also creates the configuration files required by the Evergreen `cgi-bin`
+administration scripts, and sets the user name and password for the *egadmin*
+Evergreen administrator account to your requested values.
+
+You can get a complete set of options for `eg_db_config` by passing the
+`--help` parameter.
+
+Loading sample data
+~~~~~~~~~~~~~~~~~~~
+If you add the `--load-all-sample` parameter to the `eg_db_config` command,
+a set of authority and bibliographic records, call numbers, copies, staff
+and regular users, and transactions will be loaded into your target
+database. This sample dataset is commonly referred to as the _concerto_
+sample data, and can be useful for testing out Evergreen functionality and
+for creating problem reports that developers can easily recreate with their
+own copy of the _concerto_ sample data.
+
+Creating the database on a remote server
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+In a production instance of Evergreen, your PostgreSQL server should be
+installed on a dedicated server.
+
+PostgreSQL 9.1 and later
+^^^^^^^^^^^^^^^^^^^^^^^^
+To create the database instance on a remote database server running PostgreSQL
+9.1 or later, simply use the `--create-database` flag on `eg_db_config`.
+
+Starting Evergreen
+------------------
+1. As the *root* Linux account, start the `memcached` and `ejabberd` services
+(if they aren't already running):
++
+[source, bash]
+------------------------------------------------------------------------------
+/etc/init.d/ejabberd start
+/etc/init.d/memcached start
+------------------------------------------------------------------------------
++
+2. As the *opensrf* Linux account, start Evergreen. The `-l` flag in the
+following command is only necessary if you want to force Evergreen to treat the
+hostname as `localhost`; if you configured `opensrf.xml` using the real
+hostname of your machine as returned by `perl -ENet::Domain 'print
+Net::Domain::hostfqdn() . "\n";'`, you should not use the `-l` flag.
++
+[source, bash]
+------------------------------------------------------------------------------
+osrf_control -l --start-all
+------------------------------------------------------------------------------
++
+ ** If you receive the error message `bash: osrf_control: command not found`,
+ then your environment variable `PATH` does not include the `/openils/bin`
+ directory; this should have been set in the *opensrf* Linux account's
+ `.bashrc` configuration file. To manually set the `PATH` variable, edit the
+ configuration file `~/.bashrc` as the *opensrf* Linux account and add the
+ following line:
++
+[source, bash]
+------------------------------------------------------------------------------
+export PATH=$PATH:/openils/bin
+------------------------------------------------------------------------------
++
+3. As the *opensrf* Linux account, generate the Web files needed by the staff
+ client and catalogue and update the organization unit proximity (you need to do
+ this the first time you start Evergreen, and after that each time you change the library org unit configuration.
+):
++
+[source, bash]
+------------------------------------------------------------------------------
+autogen.sh
+------------------------------------------------------------------------------
++
+4. As the *root* Linux account, restart the Apache Web server:
++
+[source, bash]
+------------------------------------------------------------------------------
+/etc/init.d/apache2 restart
+------------------------------------------------------------------------------
++
+If the Apache Web server was running when you started the OpenSRF services, you
+might not be able to successfully log in to the OPAC or staff client until the
+Apache Web server is restarted.
+
+Testing connections to Evergreen
+--------------------------------
+
+Once you have installed and started Evergreen, test your connection to
+Evergreen via `srfsh`. As the *opensrf* Linux account, issue the following
+commands to start `srfsh` and try to log onto the Evergreen server using the
+*egadmin* Evergreen administrator user name and password that you set using the
+`eg_db_config` command:
+
+[source, bash]
+------------------------------------------------------------------------------
+/openils/bin/srfsh
+srfsh% login <admin-user> <admin-pass>
+------------------------------------------------------------------------------
+
+You should see a result like:
+
+ Received Data: "250bf1518c7527a03249858687714376"
+ ------------------------------------
+ Request Completed Successfully
+ Request Time in seconds: 0.045286
+ ------------------------------------
+
+ Received Data: {
+ "ilsevent":0,
+ "textcode":"SUCCESS",
+ "desc":" ",
+ "pid":21616,
+ "stacktrace":"oils_auth.c:304",
+ "payload":{
+ "authtoken":"e5f9827cc0f93b503a1cc66bee6bdd1a",
+ "authtime":420
+ }
+
+ }
+
+ ------------------------------------
+ Request Completed Successfully
+ Request Time in seconds: 1.336568
+ ------------------------------------
+[[install-troubleshooting-1]]
+If this does not work, it's time to do some troubleshooting.
+
+ * As the *opensrf* Linux account, run the `settings-tester.pl` script to see
+ if it finds any system configuration problems. The script is found at
+ `Open-ILS/src/support-scripts/settings-tester.pl` in the Evergreen source
+ tree.
+ * Follow the steps in the http://evergreen-ils.org/dokuwiki/doku.php?id=troubleshooting:checking_for_errors[troubleshooting guide].
+ * If you have faithfully followed the entire set of installation steps
+ listed here, you are probably extremely close to a working system.
+ Gather your configuration files and log files and contact the
+ http://evergreen-ils.org/communicate/mailing-lists/[Evergreen development
+mailing list] for assistance before making any drastic changes to your system
+ configuration.
+
+Getting help
+------------
+
+Need help installing or using Evergreen? Join the mailing lists at
+http://evergreen-ils.org/communicate/mailing-lists/ or contact us on the Freenode
+IRC network on the #evergreen channel.
+
+License
+-------
+This work is licensed under the Creative Commons Attribution-ShareAlike 3.0
+Unported License. To view a copy of this license, visit
+http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Creative
+Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.
diff --git a/configure.ac b/configure.ac
index 74e6b3b..789d985 100644
--- a/configure.ac
+++ b/configure.ac
@@ -20,8 +20,8 @@
export PATH=${PATH}:/usr/sbin
AC_PREREQ(2.61)
-AC_INIT(Open-ILS, trunk, open-ils-dev at list.georgialibraries.org)
-AM_INIT_AUTOMAKE([OpenILS], [trunk])
+AC_INIT(Open-ILS, 2.11.7, open-ils-dev at list.georgialibraries.org)
+AM_INIT_AUTOMAKE([OpenILS], [2.11.7])
AC_REVISION($Revision: 0.1 $)
AC_CONFIG_SRCDIR([configure.ac])
AC_CONFIG_SUBDIRS([Open-ILS/xul/staff_client/external/libmar])
diff --git a/docs/installation/server_installation.adoc b/docs/installation/server_installation.adoc
index b82a509..8dcb544 100644
--- a/docs/installation/server_installation.adoc
+++ b/docs/installation/server_installation.adoc
@@ -56,7 +56,7 @@ Installing prerequisites
* **PostgreSQL**: Version 9.3 is recommended. The minimum supported version
is 9.1.
- * **Linux**: Evergreen 2.8 has been tested on Debian Jessie (8.0),
+ * **Linux**: Evergreen 2.11 has been tested on Debian Jessie (8.0),
Debian Wheezy (7.0), Ubuntu Xenial Xerus (16.04),
Ubuntu Trusty Tahr (14.04), and Fedora.
If you are running an older version of these distributions, you may want
diff --git a/docs/installation/server_upgrade.adoc b/docs/installation/server_upgrade.adoc
index 18ebfe5..fb6accc 100644
--- a/docs/installation/server_upgrade.adoc
+++ b/docs/installation/server_upgrade.adoc
@@ -8,7 +8,7 @@ Software Prerequisites
* **PostgreSQL**: Version 9.3 is recommended. The minimum supported version
is 9.1.
- * **Linux**: Evergreen 2.11.1 has been tested on Debian Jessie (8.0),
+ * **Linux**: Evergreen 2.11.7 has been tested on Debian Jessie (8.0),
Debian Wheezy (7.0), Ubuntu Xenial Xerus (16.04), Ubuntu Trusty Tahr (14.04),
and Fedora.
If you are running an older version of these distributions, you may want
@@ -44,12 +44,12 @@ osrf_control --localhost --stop-all
.. Back up the /openils directory.
. Upgrade OpenSRF. Download and install the latest version of OpenSRF from
the https://evergreen-ils.org/opensrf-downloads/[OpenSRF download page].
-. As the *opensrf* user, download and extract Evergreen 2.11.1:
+. As the *opensrf* user, download and extract Evergreen 2.11.7:
+
[source, bash]
-----------------------------------------------
-wget https://evergreen-ils.org/downloads/Evergreen-ILS-2.11.1.tar.gz
-tar xzf Evergreen-ILS-2.11.1.tar.gz
+wget https://evergreen-ils.org/downloads/Evergreen-ILS-2.11.7.tar.gz
+tar xzf Evergreen-ILS-2.11.7.tar.gz
-----------------------------------------------
+
[NOTE]
@@ -59,7 +59,7 @@ For the latest edition of Evergreen, check the https://evergreen-ils.org/egdownl
+
[source, bash]
---------------------------------------------
-cd /home/opensrf/Evergreen-ILS-2.11.1
+cd /home/opensrf/Evergreen-ILS-2.11.7
---------------------------------------------
+
On the next command, replace `[distribution]` with one of these values for your
@@ -84,7 +84,7 @@ make -f Open-ILS/src/extras/Makefile.install [distribution]
+
[source, bash]
------------------------------------------------------------
-cd /home/opensrf/Evergreen-ILS-2.11.1
+cd /home/opensrf/Evergreen-ILS-2.11.7
PATH=/openils/bin:$PATH ./configure --prefix=/openils --sysconfdir=/openils/conf
make
------------------------------------------------------------
@@ -95,8 +95,8 @@ These instructions assume that you have also installed OpenSRF under /openils/.
+
[source, bash]
------------------------------------------------------------
-cd /home/opensrf/Evergreen-ILS-2.11.1
-make STAFF_CLIENT_STAMP_ID=rel_2_11_1 install
+cd /home/opensrf/Evergreen-ILS-2.11.7
+make STAFF_CLIENT_STAMP_ID=rel_2_11_7 install
------------------------------------------------------------
+
. As the *root* user, change all files to be owned by the opensrf user and group:
@@ -112,7 +112,7 @@ chown -R opensrf:opensrf /openils
-----------------------------------------------------------
cd /openils/var/web/xul/
rm server
-ln -sf rel_2_11_1/server server
+ln -sf rel_2_11_7/server server
----------------------------------------------------------
+
. As the *opensrf* user, update opensrf_core.xml and opensrf.xml by copying the
@@ -132,7 +132,7 @@ Copying these configuration files will remove any customizations you have made t
+
[source, bash]
-------------------------------------------------------------------------
-cd /home/opensrf/Evergreen-ILS-2.11.1
+cd /home/opensrf/Evergreen-ILS-2.11.7
perl Open-ILS/src/support-scripts/eg_db_config --update-config --service all \
--create-offline --database evergreen --host localhost --user evergreen --password evergreen
-------------------------------------------------------------------------
@@ -156,21 +156,21 @@ The diff command can be used to show the differences between the distribution ve
+
[source, bash]
----------------------------------------------------------
-cp /home/opensrf/Evergreen-ILS-2.11.1/Open-ILS/examples/apache/eg_startup /etc/apache2/eg_startup
+cp /home/opensrf/Evergreen-ILS-2.11.7/Open-ILS/examples/apache/eg_startup /etc/apache2/eg_startup
----------------------------------------------------------
+
.. Update /etc/apache2/eg_vhost.conf by copying the example from Open-ILS/examples/apache/eg_vhost.conf.
+
[source, bash]
----------------------------------------------------------
-cp /home/opensrf/Evergreen-ILS-2.11.1/Open-ILS/examples/apache/eg_vhost.conf /etc/apache2/eg_vhost.conf
+cp /home/opensrf/Evergreen-ILS-2.11.7/Open-ILS/examples/apache/eg_vhost.conf /etc/apache2/eg_vhost.conf
----------------------------------------------------------
+
.. Update /etc/apache2/sites-available/eg.conf by copying the example from Open-ILS/examples/apache/eg.conf.
+
[source, bash]
----------------------------------------------------------
-cp /home/opensrf/Evergreen-ILS-2.11.1/Open-ILS/examples/apache/eg.conf /etc/apache2/sites-available/eg.conf
+cp /home/opensrf/Evergreen-ILS-2.11.7/Open-ILS/examples/apache/eg.conf /etc/apache2/sites-available/eg.conf
----------------------------------------------------------
Upgrade the Evergreen database schema
@@ -234,7 +234,7 @@ as a user with the ability to connect to the database server.
[source, bash]
----------------------------------------------------------
-cd /home/opensrf/Evergreen-ILS-2.11.1/Open-ILS/src/sql/Pg
+cd /home/opensrf/Evergreen-ILS-2.11.7/Open-ILS/src/sql/Pg
psql -U evergreen -h localhost -f version-upgrade/[appropriate versions here]-upgrade-db.sql evergreen
----------------------------------------------------------
commit 75829bd468738ad5441083bad7d63794d6417bf3
Author: Dan Wells <dbw2 at calvin.edu>
Date: Mon Feb 24 12:09:57 2014 -0500
Bump OpenILS.pm version
Signed-off-by: Dan Wells <dbw2 at calvin.edu>
diff --git a/Open-ILS/src/perlmods/lib/OpenILS.pm b/Open-ILS/src/perlmods/lib/OpenILS.pm
index d7235ce..122f791 100644
--- a/Open-ILS/src/perlmods/lib/OpenILS.pm
+++ b/Open-ILS/src/perlmods/lib/OpenILS.pm
@@ -6,6 +6,6 @@ OpenILS - Client and server support for the Evergreen open source library system
=cut
-our $VERSION = '2.4';
+our $VERSION = '2.1107';
1;
-----------------------------------------------------------------------
hooks/post-receive
--
Evergreen ILS
More information about the open-ils-commits
mailing list