[OPEN-ILS-DEV] SIP Server testing

Thu Sep 2 22:26:37 EDT 2010

Hi Joe,

Actually, the goal is to use port (6001) for the SIP connection. I ran the perl tests over port 6001 from one machine connecting to another on campus with success. Is there any way this could be a network firewall issue? I have requested  to have port 6001 open in the firewall but should I double check to ensure that it is open?

Thanks,
Robert
________________________________________
From: open-ils-dev-bounces at list.georgialibraries.org [open-ils-dev-bounces at list.georgialibraries.org] On Behalf Of Joe Atzberger [jatzberger at esilibrary.com]
Sent: September 2, 2010 3:39 PM
To: Evergreen Development Discussion List
Subject: Re: [OPEN-ILS-DEV] SIP Server testing

If he can get in via telnet and test, then his machines should be able to also.  The trick if you are targetting the actual "telnet" port (8023) is tuning the expect scripts than handle the initial login prompts.  More modern implementations tend to target the "raw" port (6001).  You said you used telnet clients, but which port were you targeting?

Also, it looks like #021#015 would be (octal for) XON then CR.  See if he can skip the XON part of the handshaking.  I'm not sure how that ends up becoming "q" though.

Hopefully you can find a terminal configuration that works.  Otherwise we probably revisit the issue of line-endings and whitespace handling that is a perennial SIP topic.

--Joe

On Thu, Sep 2, 2010 at 3:12 PM, Soulliere, Robert <robert.soulliere at mohawkcollege.ca<mailto:robert.soulliere at mohawkcollege.ca>> wrote:
Hi Everyone,

We were able to connect to our SIP server and run the tests successfully from the localhost and another machine on our network. I was able to run the command to pull in patron data using the telnet test.

However, our 3M rep was unable to connect from the self-check station from offsite.

The  logs on his end are as follows:

09/02/10 14:35:21 - 1 SIP 39 33 30 30 43 4E 53 49 50 55 73 65 72 31 7C 43 4F 53 49 50 55 73 65 72 31 7C 43 50 46 45 4E 4E 45 4C 4C 7C 0D
09/02/10 14:35:51 - 1 SIP SIP: Passing Timeout message to SIP thread.
09/02/10 14:35:51 - 1 SIP SIP: Calling com_send to pass a SIP message to the COM thread.

The error messages in our SIP log on the server are:

Sep  2 13:36:08 libdog opensrf_sip[26158]: read_SIP_packet, INPUT MSG: '#021#015'
Sep  2 13:36:10 libdog opensrf_sip[26158]: read_SIP_packet, INPUT MSG: 'q#015'
Sep  2 13:36:10 libdog opensrf_sip[26158]: read_SIP_packet, INPUT MSG: 'q'
Sep  2 13:36:10 libdog opensrf_sip[26158]: read_SIP_packet, trimmed 1 character(s) (after chomps).
Sep  2 13:36:10 libdog opensrf_sip[26158]: INPUT MSG: 'q'
Sep  2 13:36:10 libdog opensrf_sip[26158]: Sip::MsgType::new('Sip::MsgType', 'q', 'q'): msgtag '0'
Sep  2 13:36:10 libdog opensrf_sip[26158]: new Sip::MsgType: Skipping message of unknown type 'q' in 'q'

The 3M contact was able to connect via the telnet test successfully from offsite. Anything in the logs that jump out at anyone or are there any thing about the self check station itself that could be an issue?

Thanks,
Robert
________________________________________
From: open-ils-dev-bounces at list.georgialibraries.org<mailto:open-ils-dev-bounces at list.georgialibraries.org> [open-ils-dev-bounces at list.georgialibraries.org<mailto:open-ils-dev-bounces at list.georgialibraries.org>] On Behalf Of Soulliere, Robert [robert.soulliere at mohawkcollege.ca<mailto:robert.soulliere at mohawkcollege.ca>]
Sent: September 1, 2010 3:53 PM
To: atz at esilibrary.com<mailto:atz at esilibrary.com>; Evergreen Development Discussion List
Subject: Re: [OPEN-ILS-DEV] SIP Server testing

Thanks Joe!

Updating the Perl module solved the problem.

Regards,
Robert

From: open-ils-dev-bounces at list.georgialibraries.org<mailto:open-ils-dev-bounces at list.georgialibraries.org> [mailto:open-ils-dev-bounces at list.georgialibraries.org<mailto:open-ils-dev-bounces at list.georgialibraries.org>] On Behalf Of Joe Atzberger
Sent: Tuesday, August 31, 2010 5:41 PM
To: Evergreen Development Discussion List
Subject: Re: [OPEN-ILS-DEV] SIP Server testing

Update your version of Test::More.  More recent versions (from cpan, probably) include the "note" subroutine.

--Joe
On Tue, Aug 31, 2010 at 3:32 PM, Soulliere, Robert <robert.soulliere at mohawkcollege.ca<mailto:robert.soulliere at mohawkcollege.ca><mailto:robert.soulliere at mohawkcollege.ca<mailto:robert.soulliere at mohawkcollege.ca>>> wrote:
Hi all,

I was setting up a SIP server and had an error during the testing phase. When I run the status test PERL5LIB=../ perl 01patron_status.t, I get the error:

Undefined subroutine &SIPtest::note called at SIPtest.pm line 200.

Is this telling me that I am probably missing some of the prerequisite Perl modules? I was able to complete the tests on or test server running Evergreen 1.6.1.1 but the same  tests failed on our live server running 1.6.0 + booking.

Thanks,
Robert

________________________________
This E-mail contains privileged and confidential information intended
only for the individual or entity named in the message. If the reader
of this message is not the intended recipient, or the agent responsible
to deliver it to the intended recipient, you are hereby notified that
any review, dissemination, distribution or copying of this communication
is prohibited. If this communication was received in error, please
notify the sender by reply E-mail immediately, and delete and destroy
the original message.

This E-mail contains privileged and confidential information intended
only for the individual or entity named in the message.  If the reader
of this message is not the intended recipient, or the agent responsible
to deliver it to the intended recipient, you are hereby notified that
any review, dissemination, distribution or copying of this communication
is prohibited.  If this communication was received in error, please
notify the sender by reply E-mail immediately, and delete and destroy
the original message.