[OPEN-ILS-GENERAL] srfsh% login USER PASSWORD wont authenticate
Howard Canning
hcanning at bluehills.org
Sat Mar 7 15:24:13 EST 2015
Thanks!!!!
Should I use
127.0.0.1 * localhost.localdomain localhost*
127.0.1.1 ubuntu
127.0.1.2 public.localhost public
127.0.1.3 private.localhost private
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
OR
127.0.0.1 * localhost*
127.0.1.1 ubuntu
127.0.1.2 public.localhost public
127.0.1.3 private.localhost private
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
On Sat, Mar 7, 2015 at 1:10 PM, Ben Shum <bshum at biblio.org> wrote:
> Hi Howard,
>
> So, for the ejabberd communications, they are actually flexible enough
> to allow you to send messages to/from any host you configure for it.
> The default instructions assume that you're setting up a single server
> to run Evergreen (not multiple servers in a cluster). As such, the
> entries for public.localhost and private.localhost are intentionally
> 127.0.x.x so that they're internal to the server, and not exposed as
> external communications. Also, ejabberd by default may not be
> configured to listen from external sources.
>
> So, when you connect with an Evergreen system, via the IP address, the
> apache web server should be replying, not ejabberd.
>
> In your example, you won't want your Linode's public IP or your
> client's private IP reflected in the ejabberd configuration. You
> should follow the instructions as suggested for the best working
> solution.
>
> -- Ben
>
> On Sat, Mar 7, 2015 at 11:26 AM, Howard Canning <hcanning at bluehills.org>
> wrote:
> > Assuming my server IP is e.g. 20.21.22.23 and my personal PC IP public
> > address is e.g. 50.60.70.80
> >
> > I dont quite get the public.localhost thing.
> >
> > instructions suggest adding:
> >
> > 127.0.1.2 public.localhost public
> > 127.0.1.3 private.localhost private
> >
> > ...such that /etc/hosts reads:
> >
> > 127.0.0.1 localhost
> > 127.0.1.1 ubuntu
> > 127.0.1.2 public.localhost public
> > 127.0.1.3 private.localhost private
> > # The following lines are desirable for IPv6 capable hosts
> > ::1 localhost ip6-localhost ip6-loopback
> > ff02::1 ip6-allnodes
> > ff02::2 ip6-allrouters
> >
> >
> > but should I be changing this to
> >
> > 127.0.0.1 localhost
> > 127.0.1.1 ubuntu
> > 20.21.22.23 public.localhost public
> > 50.60.70.80 private.localhost private
> > # The following lines are desirable for IPv6 capable hosts
> > ::1 localhost ip6-localhost ip6-loopback
> > ff02::1 ip6-allnodes
> > ff02::2 ip6-allrouters
> >
> > I'm lost.
> >
> > Regarding the below...
> >
> > ejabberdctl register router private.localhost tempPassword123
> >
> >
> > ejabberdctl register opensrf private.localhost tempPassword123
> >
> >
> > ejabberdctl register router public.localhost tempPassword123
> >
> >
> > ejabberdctl register opensrf public.localhost tempPassword123
> >
> > ....
> >
> > Do I need to specify something else for public.localhost and update some
> > files someplace? For now I just want to get the basic install working and
> > see the Evergreen ILS at e.g. http://20.21.22.23 in my browser.
> >
> >
> >
> > Thanks
> >
> >
> >
> > On Sat, Mar 7, 2015 at 10:25 AM, Howard Canning <hcanning at bluehills.org>
> > wrote:
> >>
> >> Hi all,
> >> Thanks for the replies. Ok I started afresh to reduce chances of an
> error
> >> as this is my final attempt hopefully.
> >> Attached is my rather OCD/methodical list of ssh commands, logs, osrf
> >> diagnostic and the end settings tester I use to install everything. I am
> >> installed on Ubuntu 14.04 on using a linode.com server.
> >>
> >> I use Putty as my SSH client and also monitor file locations using
> >> Filezilla. See screenshots of files in filezilla and the etc/host in
> Putty..
> >>
> >> I switched out the password btw.
> >>
> >> This install actually threw no errors so I'm hopeful.
> >>
> >> I am installing:
> >>
> >> http://evergreen-ils.org/downloads/opensrf-2.4.0.tar.gz
> >>
> >> Evergreen Server
> >>
> >> http://evergreen-ils.org/downloads/Evergreen-ILS-2.7.4.tar.gz
> >>
> >> Client
> >>
> >> http://evergreen-ils.org/downloads/evergreen-setup-2.7.4.exe
> >>
> >>
> >>
> >> ****
> >>
> >> I also get the below when I run autogen.sh (only error):
> >>
> >> opensrf at li904-206:~$ autogen.sh
> >> Updating Evergreen organization tree and IDL
> >>
> >> Updating fieldmapper
> >> Empty filename at
> >> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199.
> >> -> /openils/var/web/opac/common/js//fmall.js
> >> Updating web_fieldmapper
> >> Empty filename at
> >> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199.
> >> -> /openils/var/web/opac/common/js//fmcore.js
> >> Updating OrgTree
> >> Empty filename at
> >> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199.
> >> Empty filename at
> >> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199.
> >> Exception: OpenSRF::EX::Session 2015-03-07T14:40:19 OpenSRF::Transport
> >> /usr/local/share/perl/5.18.2/OpenSRF/Transport.pm:83 Session Error:
> >> router at private.localhost/open-ils.cstore IS NOT CONNECTED TO THE
> NETWORK!!!
> >>
> >>
> >> ....which I expect is due to my server IP not being reflected someplace?
> >>
> >> So if my linode server is running as e.g. IP 21.22.23.24 ...where do I
> >> update this in the config files.
> >>
> >> I ultimately want to login to evergreen at http://21.22.23.24
> >>
> >> In Putty "su -" switches me to root if thats ok?
> >>
> >> "sudo su -" asks me for the sudo password for "user" which isn't set. I
> >> created "user" using adduser with default settings.
> >>
> >> Thanks all for your help!
> >>
> >>
> >> Same attachments on dropbox if not accessible otherwise:
> >>
> https://www.dropbox.com/sh/woa0a4qib8yjtx4/AACDT2p8MdL5QUqHoJ-YoS7Ia?dl=0
> >>
> >>
> >>
> >> On Sat, Mar 7, 2015 at 8:29 AM, Chris Sharp <
> csharp at georgialibraries.org>
> >> wrote:
> >>>
> >>> Hi Howard,
> >>>
> >>> ----- Original Message -----
> >>> > From: "Howard Canning" <hcanning at bluehills.org>
> >>> > To: "Evergreen Discussion Group"
> >>> > <open-ils-general at list.georgialibraries.org>
> >>> > Sent: Friday, March 6, 2015 9:17:30 PM
> >>> > Subject: Re: [OPEN-ILS-GENERAL] srfsh% login USER PASSWORD wont
> >>> > authenticate
> >>> >
> >>> > Not having luck with installing Evergreen ILS. Attempted at least 5
> >>> > long
> >>> > comprehensive times with ubuntu 14.04 and 12.04.
> >>> > With Ubuntu 12.04 just now
> >>> >
> >>> > cp Open-ILS/examples/apache/eg.conf
> /etc/apache2/sites-available/
> >>> > cp Open-ILS/examples/apache/eg_vhost.conf /etc/apache2/
> >>> > cp Open-ILS/examples/apache/eg_startup /etc/apache2/
> >>> >
> >>> > actually had "in" appended to the ends in their directories...so:
> >>> > cp Open-ILS/examples/apache/eg.conf.in
> >>> > /etc/apache2/sites-available/
> >>> > cp Open-ILS/examples/apache/eg_vhost.conf.in /etc/apache2/
> >>> > cp Open-ILS/examples/apache/eg_startup.in /etc/apache2/
> >>> >
> >>> > and errors like:
> >>> >
> >>> > ossible unintended interpolation of @sysconfdir in string at
> >>> > Open-ILS/src/support-scripts/eg_db_config line 329.
> >>> > Possible unintended interpolation of @sysconfdir in string at
> >>> > Open-ILS/src/support-scripts/eg_db_config line 329.
> >>> > Global symbol "@sysconfdir" requires explicit package name at
> >>> > Open-ILS/src/support-scripts/eg_db_config line 329.
> >>> > Global symbol "@sysconfdir" requires explicit package name at
> >>> > Open-ILS/src/support-scripts/eg_db_config line 329.
> >>> > Execution of Open-ILS/src/support-scripts/eg_db_config aborted due to
> >>> > compilation errors.
> >>> >
> >>> > ************************
> >>>
> >>> Are you copying these from the source directory from which you built
> and
> >>> installed Evergreen? The "configure/make/make install" process should
> be
> >>> substituting the actual values for @sysconfdir, etc. and creating the
> files
> >>> described in the installation README. Sounds like you either missed a
> step
> >>> or or working from more than one source directory.
> >>>
> >>> >
> >>> > Is there a version of OpenSRF, Evergreen, Ubuntu and client that
> >>> > install cleanly with a tutorial to go with.
> >>> >
> >>> > I just keep getting errors thrown despite being methodical. Apache
> >>> > restart issues, services not running like open-ils.auth, apparent
> >>> > data corruption....
> >>> >
> >>> > My luck is out. Would love to see this working.
> >>> >
> >>> > Thanks
> >>>
> >>> If what you're after is a running Evergreen system, you might consider
> >>> installing from the GPLS archive: http://archive.georgialibraries.org/
> It's
> >>> slightly behind on the version, but still in the 2.7 release family.
> It
> >>> requires a fresh install of Ubuntu 12.04.
> >>>
> >>> However, if your goal is to successfully get through the installation
> >>> instructions, we can help you do that too. For live help (M-F 9-5
> EST/EDT),
> >>> use the #evergreen IRC channel (
> http://evergreen-ils.org/communicate/irc/
> >>> for details). Sometimes people are around on the weekends too.
> >>>
> >>> --
> >>> Chris Sharp
> >>> PINES System Administrator
> >>> Georgia Public Library Service
> >>> 1800 Century Place, Suite 150
> >>> Atlanta, Georgia 30345
> >>> (404) 235-7147
> >>> csharp at georgialibraries.org
> >>> http://pines.georgialibraries.org/
> >>
> >>
> >
>
>
>
> --
> Benjamin Shum
> Evergreen Systems Manager
> Bibliomation, Inc.
> 24 Wooster Ave.
> Waterbury, CT 06708
> 203-577-4070, ext. 113
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://libmail.georgialibraries.org/pipermail/open-ils-general/attachments/20150307/6ecd2b69/attachment-0001.html>
More information about the Open-ils-general
mailing list