[OPEN-ILS-GENERAL] srfsh% login USER PASSWORD wont authenticate
Howard Canning
hcanning at bluehills.org
Sat Mar 7 15:50:50 EST 2015
Thanks. Ok moved to a bigger linode and can access the website now. When I
try to connect with the Staff Client 274 I get the attached error though:
TypeError: g.my_libs_tree is null
Any ideas. Thanks so much. Ive spent 20-30 hrs on this easily
On Sat, Mar 7, 2015 at 1:16 PM, Ben Shum <bshum at biblio.org> wrote:
> For curiosity, since you mention this is a Linode, how much system
> resources are you assigning your instance? Depending on the memory
> limits on your system, you might be hitting some problems too with
> startup/use and lack of available memory and Linux killing off
> processes to try and work around things.
>
> In practice, I've found for myself when building Evergreen test
> systems to start off with around 3 GB of RAM or better.
>
> -- Ben
>
> On Sat, Mar 7, 2015 at 1:10 PM, Ben Shum <bshum at biblio.org> wrote:
> > Hi Howard,
> >
> > So, for the ejabberd communications, they are actually flexible enough
> > to allow you to send messages to/from any host you configure for it.
> > The default instructions assume that you're setting up a single server
> > to run Evergreen (not multiple servers in a cluster). As such, the
> > entries for public.localhost and private.localhost are intentionally
> > 127.0.x.x so that they're internal to the server, and not exposed as
> > external communications. Also, ejabberd by default may not be
> > configured to listen from external sources.
> >
> > So, when you connect with an Evergreen system, via the IP address, the
> > apache web server should be replying, not ejabberd.
> >
> > In your example, you won't want your Linode's public IP or your
> > client's private IP reflected in the ejabberd configuration. You
> > should follow the instructions as suggested for the best working
> > solution.
> >
> > -- Ben
> >
> > On Sat, Mar 7, 2015 at 11:26 AM, Howard Canning <hcanning at bluehills.org>
> wrote:
> >> Assuming my server IP is e.g. 20.21.22.23 and my personal PC IP public
> >> address is e.g. 50.60.70.80
> >>
> >> I dont quite get the public.localhost thing.
> >>
> >> instructions suggest adding:
> >>
> >> 127.0.1.2 public.localhost public
> >> 127.0.1.3 private.localhost private
> >>
> >> ...such that /etc/hosts reads:
> >>
> >> 127.0.0.1 localhost
> >> 127.0.1.1 ubuntu
> >> 127.0.1.2 public.localhost public
> >> 127.0.1.3 private.localhost private
> >> # The following lines are desirable for IPv6 capable hosts
> >> ::1 localhost ip6-localhost ip6-loopback
> >> ff02::1 ip6-allnodes
> >> ff02::2 ip6-allrouters
> >>
> >>
> >> but should I be changing this to
> >>
> >> 127.0.0.1 localhost
> >> 127.0.1.1 ubuntu
> >> 20.21.22.23 public.localhost public
> >> 50.60.70.80 private.localhost private
> >> # The following lines are desirable for IPv6 capable hosts
> >> ::1 localhost ip6-localhost ip6-loopback
> >> ff02::1 ip6-allnodes
> >> ff02::2 ip6-allrouters
> >>
> >> I'm lost.
> >>
> >> Regarding the below...
> >>
> >> ejabberdctl register router private.localhost tempPassword123
> >>
> >>
> >> ejabberdctl register opensrf private.localhost tempPassword123
> >>
> >>
> >> ejabberdctl register router public.localhost tempPassword123
> >>
> >>
> >> ejabberdctl register opensrf public.localhost tempPassword123
> >>
> >> ....
> >>
> >> Do I need to specify something else for public.localhost and update some
> >> files someplace? For now I just want to get the basic install working
> and
> >> see the Evergreen ILS at e.g. http://20.21.22.23 in my browser.
> >>
> >>
> >>
> >> Thanks
> >>
> >>
> >>
> >> On Sat, Mar 7, 2015 at 10:25 AM, Howard Canning <hcanning at bluehills.org
> >
> >> wrote:
> >>>
> >>> Hi all,
> >>> Thanks for the replies. Ok I started afresh to reduce chances of an
> error
> >>> as this is my final attempt hopefully.
> >>> Attached is my rather OCD/methodical list of ssh commands, logs, osrf
> >>> diagnostic and the end settings tester I use to install everything. I
> am
> >>> installed on Ubuntu 14.04 on using a linode.com server.
> >>>
> >>> I use Putty as my SSH client and also monitor file locations using
> >>> Filezilla. See screenshots of files in filezilla and the etc/host in
> Putty..
> >>>
> >>> I switched out the password btw.
> >>>
> >>> This install actually threw no errors so I'm hopeful.
> >>>
> >>> I am installing:
> >>>
> >>> http://evergreen-ils.org/downloads/opensrf-2.4.0.tar.gz
> >>>
> >>> Evergreen Server
> >>>
> >>> http://evergreen-ils.org/downloads/Evergreen-ILS-2.7.4.tar.gz
> >>>
> >>> Client
> >>>
> >>> http://evergreen-ils.org/downloads/evergreen-setup-2.7.4.exe
> >>>
> >>>
> >>>
> >>> ****
> >>>
> >>> I also get the below when I run autogen.sh (only error):
> >>>
> >>> opensrf at li904-206:~$ autogen.sh
> >>> Updating Evergreen organization tree and IDL
> >>>
> >>> Updating fieldmapper
> >>> Empty filename at
> >>> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199.
> >>> -> /openils/var/web/opac/common/js//fmall.js
> >>> Updating web_fieldmapper
> >>> Empty filename at
> >>> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199.
> >>> -> /openils/var/web/opac/common/js//fmcore.js
> >>> Updating OrgTree
> >>> Empty filename at
> >>> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199.
> >>> Empty filename at
> >>> /usr/local/share/perl/5.18.2/OpenILS/Utils/Fieldmapper.pm line 199.
> >>> Exception: OpenSRF::EX::Session 2015-03-07T14:40:19 OpenSRF::Transport
> >>> /usr/local/share/perl/5.18.2/OpenSRF/Transport.pm:83 Session Error:
> >>> router at private.localhost/open-ils.cstore IS NOT CONNECTED TO THE
> NETWORK!!!
> >>>
> >>>
> >>> ....which I expect is due to my server IP not being reflected
> someplace?
> >>>
> >>> So if my linode server is running as e.g. IP 21.22.23.24 ...where do I
> >>> update this in the config files.
> >>>
> >>> I ultimately want to login to evergreen at http://21.22.23.24
> >>>
> >>> In Putty "su -" switches me to root if thats ok?
> >>>
> >>> "sudo su -" asks me for the sudo password for "user" which isn't set. I
> >>> created "user" using adduser with default settings.
> >>>
> >>> Thanks all for your help!
> >>>
> >>>
> >>> Same attachments on dropbox if not accessible otherwise:
> >>>
> https://www.dropbox.com/sh/woa0a4qib8yjtx4/AACDT2p8MdL5QUqHoJ-YoS7Ia?dl=0
> >>>
> >>>
> >>>
> >>> On Sat, Mar 7, 2015 at 8:29 AM, Chris Sharp <
> csharp at georgialibraries.org>
> >>> wrote:
> >>>>
> >>>> Hi Howard,
> >>>>
> >>>> ----- Original Message -----
> >>>> > From: "Howard Canning" <hcanning at bluehills.org>
> >>>> > To: "Evergreen Discussion Group"
> >>>> > <open-ils-general at list.georgialibraries.org>
> >>>> > Sent: Friday, March 6, 2015 9:17:30 PM
> >>>> > Subject: Re: [OPEN-ILS-GENERAL] srfsh% login USER PASSWORD wont
> >>>> > authenticate
> >>>> >
> >>>> > Not having luck with installing Evergreen ILS. Attempted at least 5
> >>>> > long
> >>>> > comprehensive times with ubuntu 14.04 and 12.04.
> >>>> > With Ubuntu 12.04 just now
> >>>> >
> >>>> > cp Open-ILS/examples/apache/eg.conf
> /etc/apache2/sites-available/
> >>>> > cp Open-ILS/examples/apache/eg_vhost.conf /etc/apache2/
> >>>> > cp Open-ILS/examples/apache/eg_startup /etc/apache2/
> >>>> >
> >>>> > actually had "in" appended to the ends in their directories...so:
> >>>> > cp Open-ILS/examples/apache/eg.conf.in
> >>>> > /etc/apache2/sites-available/
> >>>> > cp Open-ILS/examples/apache/eg_vhost.conf.in /etc/apache2/
> >>>> > cp Open-ILS/examples/apache/eg_startup.in /etc/apache2/
> >>>> >
> >>>> > and errors like:
> >>>> >
> >>>> > ossible unintended interpolation of @sysconfdir in string at
> >>>> > Open-ILS/src/support-scripts/eg_db_config line 329.
> >>>> > Possible unintended interpolation of @sysconfdir in string at
> >>>> > Open-ILS/src/support-scripts/eg_db_config line 329.
> >>>> > Global symbol "@sysconfdir" requires explicit package name at
> >>>> > Open-ILS/src/support-scripts/eg_db_config line 329.
> >>>> > Global symbol "@sysconfdir" requires explicit package name at
> >>>> > Open-ILS/src/support-scripts/eg_db_config line 329.
> >>>> > Execution of Open-ILS/src/support-scripts/eg_db_config aborted due
> to
> >>>> > compilation errors.
> >>>> >
> >>>> > ************************
> >>>>
> >>>> Are you copying these from the source directory from which you built
> and
> >>>> installed Evergreen? The "configure/make/make install" process
> should be
> >>>> substituting the actual values for @sysconfdir, etc. and creating the
> files
> >>>> described in the installation README. Sounds like you either missed
> a step
> >>>> or or working from more than one source directory.
> >>>>
> >>>> >
> >>>> > Is there a version of OpenSRF, Evergreen, Ubuntu and client that
> >>>> > install cleanly with a tutorial to go with.
> >>>> >
> >>>> > I just keep getting errors thrown despite being methodical. Apache
> >>>> > restart issues, services not running like open-ils.auth, apparent
> >>>> > data corruption....
> >>>> >
> >>>> > My luck is out. Would love to see this working.
> >>>> >
> >>>> > Thanks
> >>>>
> >>>> If what you're after is a running Evergreen system, you might consider
> >>>> installing from the GPLS archive:
> http://archive.georgialibraries.org/ It's
> >>>> slightly behind on the version, but still in the 2.7 release family.
> It
> >>>> requires a fresh install of Ubuntu 12.04.
> >>>>
> >>>> However, if your goal is to successfully get through the installation
> >>>> instructions, we can help you do that too. For live help (M-F 9-5
> EST/EDT),
> >>>> use the #evergreen IRC channel (
> http://evergreen-ils.org/communicate/irc/
> >>>> for details). Sometimes people are around on the weekends too.
> >>>>
> >>>> --
> >>>> Chris Sharp
> >>>> PINES System Administrator
> >>>> Georgia Public Library Service
> >>>> 1800 Century Place, Suite 150
> >>>> Atlanta, Georgia 30345
> >>>> (404) 235-7147
> >>>> csharp at georgialibraries.org
> >>>> http://pines.georgialibraries.org/
> >>>
> >>>
> >>
> >
> >
> >
> > --
> > Benjamin Shum
> > Evergreen Systems Manager
> > Bibliomation, Inc.
> > 24 Wooster Ave.
> > Waterbury, CT 06708
> > 203-577-4070, ext. 113
>
>
>
> --
> Benjamin Shum
> Evergreen Systems Manager
> Bibliomation, Inc.
> 24 Wooster Ave.
> Waterbury, CT 06708
> 203-577-4070, ext. 113
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://libmail.georgialibraries.org/pipermail/open-ils-general/attachments/20150307/534c26a8/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: client-issue.PNG
Type: image/png
Size: 37736 bytes
Desc: not available
URL: <http://libmail.georgialibraries.org/pipermail/open-ils-general/attachments/20150307/534c26a8/attachment-0001.png>
More information about the Open-ils-general
mailing list