[Opensrf-commits] r1481 - trunk/src/extras

svn at svn.open-ils.org svn at svn.open-ils.org
Sun Oct 26 23:25:19 EDT 2008 

Author: dbs
Date: 2008-10-26 23:25:12 -0400 (Sun, 26 Oct 2008)
New Revision: 1481

Added:
   trunk/src/extras/Makefile.install
Log:
Add a prerequisite installer for OpenSRF (carved out of the Evergreen installer)


Added: trunk/src/extras/Makefile.install
===================================================================
--- trunk/src/extras/Makefile.install	                        (rev 0)
+++ trunk/src/extras/Makefile.install	2008-10-27 03:25:12 UTC (rev 1481)
@@ -0,0 +1,315 @@
+# ---------------------------------------------------------------------
+# Author: Bill Erickson <erickson at esilibrary.com>
+#
+# Makefile to install prerequisites for OpenSRF
+#
+# Currently supports Debian (etch), Ubuntu (gutsy), and Gentoo.
+# Working towards support of CentOS 5 / RHEL 5.
+# Installs Perl prereqs, libjs with Perl wrapper
+#
+# usage:
+# 	make -f Makefile.install debian
+# 	- or -
+# 	make -f Makefile.install ubuntu
+# 	- or -
+# 	make -f Makefile.install centos
+# 	- or -
+# 	make -f Makefile.install rhel
+# 	- or -
+# 	make -f Makefile.install gentoo
+#
+# Notes:
+#
+# 	This makefile has been tested much more with Ubuntu and Debian than
+#   CentOS, Gentoo, or RHEL.
+#
+# 	Gentoo (especially amd64) requires a good bit of masked package
+# 	mangling for some packages.  These are not documented here because
+# 	they will continue to evolve
+#
+# ---------------------------------------------------------------------
+
+# Make any assumptions about the shell being used explicit
+SHELL=/bin/bash 
+
+# XXX
+# Gentoo needs explicit versions on many of these packages
+# to simulate a "blessed" set of packages
+
+# ejabberd is not packaged on CentOS/RHEL, so we have to
+# download the installable package from the source
+EJABBERD_VER=2.0.1
+EJABBERD_PKG=ejabberd-2.0.1_2-linux-x86-installer.bin
+EJABBERD_HOST=http://www.process-one.net/downloads/ejabberd
+
+# libmemcache is not packaged on CentOS/RHEL
+LIBMEMCACHE=libmemcache-1.4.0.rc2
+LIBMEMCACHE_HOST=http://people.freebsd.org/~seanc/libmemcache/
+
+# XML::LibXSLT fails due to old libxslt
+XSLT=libxslt-1.1.22
+XSLT_HOST=ftp://ftp.gnome.org/pub/GNOME/sources/libxslt/1.1
+
+# libxslt depends on a newer version of libxml2:
+XML2=libxml2-2.6.30.tar.gz
+XML2_HOST=ftp://ftp.gnome.org/pub/GNOME/sources/libxml2/2.6
+
+APT_TOOL=aptitude
+
+# Debian dependencies
+DEBS =  \
+	apache2-mpm-prefork\
+	apache2-prefork-dev\
+	autoconf\
+	automake\
+	build-essential\
+	ejabberd\
+	less\
+	libapache2-mod-perl2\
+	libcache-memcached-perl\
+	libclass-dbi-abstractsearch-perl\
+	libclass-dbi-sqlite-perl\
+	liberror-perl\
+	libexpat1-dev\
+	libfile-find-rule-perl\
+	libfreezethaw-perl\
+	liblog-log4perl-perl\
+	libmemcache-dev\
+	libmodule-build-perl\
+	libnet-jabber-perl\
+	libperl-dev\
+	libreadline5-dev\
+	librpc-xml-perl\
+	libtemplate-perl\
+	libtest-pod-perl\
+	libtie-ixhash-perl\
+	libtool\
+	libuniversal-require-perl\
+	libunix-syslog-perl\
+	libwww-perl\
+	libxml2-dev\
+	libxml-libxml-perl\
+	libxml-libxslt-perl\
+	libxml-simple-perl\
+	libxslt1-dev\
+	memcached\
+	ntpdate\
+	psmisc\
+	python-dev\
+	python-libxml2\
+	python-setuptools\
+	syslog-ng
+
+CENTOS = \
+	apr-util-devel \
+	autoconf \
+	automake \
+	gcc \
+	gdbm-devel \
+	httpd-devel \
+	less \
+	libtool \
+	libxml2-devel \
+	libxslt-devel \
+	make \
+	mod_perl \
+	mod_ssl \
+	ncurses \
+	ncurses-devel \
+	ntp \
+	perl-DBI \
+	perl-XML-LibXML \
+	perl-XML-Simple \
+	perl-libwww-perl \
+	psmisc \
+	python-devel \
+	python-setuptools\
+	readline-devel \
+	wget
+
+# Some of these packages have stupid bugs in their test suites
+# that are simply too painful to workaround
+CENTOS_PERL_NOTEST = \
+	RPC::XML
+
+CENTOS_PERL_LOCAL = \
+	XML-LibXSLT
+
+CENTOS_PERL = \
+	Cache::Memcached \
+	Class::DBI::AbstractSearch \
+	Class::DBI::SQLite \
+	Error \
+	File::Find::Rule \
+	FreezeThaw \
+	Log::Log4perl \
+	Net::Jabber \
+	Template \
+	Test::Pod \
+	Tie::IxHash \
+	Unix::Syslog \
+	UNIVERSAL::require \
+	XML::LibXSLT
+
+GENTOOS = \
+	vim\
+	ntp\
+	memcached\
+	libmemcache\
+	net-misc/telnet-bsd\
+	app-portage/gentoolkit\
+	gsasl\
+	ejabberd\
+	mod_perl\
+	net-fs/nfs-utils\
+	dev-libs/apr\
+	dev-perl/Cache-Memcached\
+    dev-perl/DBI\
+	dev-perl/Log-Log4perl\
+	dev-perl/Unix-Syslog\
+	dev-perl/XML-LibXML\
+	dev-perl/XML-LibXSLT\
+	dev-perl/XML-Simple\
+	dev-perl/Net-Jabber\
+	dev-perl/libwww-perl\
+	dev-perl/Template-Toolkit\
+	dev-perl/Error\
+	dev-perl/Tie-IxHash\
+	dev-perl/FreezeThaw
+
+GENTOO_RC = \
+	ejabberd\
+	memcached\
+	portmap
+
+GENTOO_PERL = \
+	Class::DBI::AbstractSearch\
+	UNIVERSAL::require
+
+DEB_APACHE_MODS = \
+	expires\
+	include\
+	proxy\
+	proxy_http\
+	rewrite\
+	ssl
+ 
+
+# generic CPAN modules
+CPAN_MODULES = \
+	DateTime::Format::ISO8601 \
+	TMTM/Class-DBI-0.96.tar.gz \
+	RHANDOM/Net-Server-0.90.tar.gz \
+	JSON::XS \
+	XML::LibXML::XPathContext
+
+
+# ----------------------------------------------------------------------------
+
+all: 
+	@echo "please specify an OS" && exit 0
+
+
+# these should be the same for any distro
+install: install_cpan
+
+centos: install_centos_rpms install_ejabberd install_libmemcache install install_libxml2 install_libxslt install_centos_perl create_ld_local
+
+debian: install_debs install debian_sys_config
+
+gentoo: install_gentoos install_gentoo_rc install_gentoo_perl install
+
+rhel: centos
+
+ubuntu: install_debs install debian_sys_config
+
+
+# - COMMON TARGETS ---------------------------------------------------------
+
+# Install the CPAN modules
+install_cpan: 
+	for m in $(CPAN_MODULES); do perl -MCPAN -e "install \"$$m\";"; done
+
+# Install ejabberd from official project installer binary
+install_ejabberd:    
+	if [ ! -f $(EJABBERD_PKG).gz ]; then wget $(EJABBERD_HOST)/$(EJABBERD_VER)/$(EJABBERD_PKG).gz; fi;
+	gunzip $(EJABBERD_PKG).gz
+	chmod u+x $(EJABBERD_PKG).gz
+	./$(EJABBERD_PKG) --mode unattended --prefix /opt/ejabberd --adminpw opensrf
+
+# Install libmemcache from the official project source
+install_libmemcache:
+	if [ ! -d $(LIBMEMCACHE) ]; then wget $(LIBMEMCACHE_HOST)/$(LIBMEMCACHE).tar.bz2; fi;
+	tar xjf $(LIBMEMCACHE).tar.bz2
+	cd $(LIBMEMCACHE) && ./configure && make && make install
+
+# Install a newer version of libxslt
+install_libxslt:    
+	if [ ! -d $(XSLT) ]; then wget $(XSLT_HOST)/$(XSLT).tar.gz; fi;
+	tar xzf $(XSLT).tar.gz
+	cd $(XSLT) && ./configure --with-libxml-prefix=/usr/local && make && make install
+
+# Install a newer version of libxml2
+install_libxml2:    
+	if [ ! -d $(XML2) ]; then wget $(XML2_HOST)/$(XML2).tar.gz; fi;
+	tar xzf $(XML2).tar.gz
+	cd $(XML2) && ./configure && make && make install
+
+clean:
+	make -C $(LIBJS_PERL) clean
+	make -C $(XML2) clean
+	make -C $(XSLT) clean
+	make -f Makefile.ref -C js/src/ clean
+
+
+# ------------------------------------------------------------------
+# - DEBIAN ---------------------------------------------------------
+
+debian_sys_config: 
+	# link the apache modules in
+	for m in $(DEB_APACHE_MODS); do a2enmod $$m; done;
+
+	# adds a placeholder module so apxs will be happy
+	if [ ! "$$(grep mod_placeholder /etc/apache2/httpd.conf)" ]; then \
+		echo -e "#\n#LoadModule mod_placeholder /usr/lib/apache2/modules/mod_placeholder.so" \
+			>> /etc/apache2/httpd.conf; \
+	fi;
+
+# Install the debian-specific dependencies
+install_debs:
+	$(APT_TOOL) install $(DEBS)
+
+# ------------------------------------------------------------------
+# - GENTOO ---------------------------------------------------------
+
+install_gentoos:
+	emerge -n $(GENTOOS)
+
+install_gentoo_rc:
+	for m in $(GENTOO_RC); do rc-update add $$m default; done;
+
+install_gentoo_perl:
+	for m in $(GENTOO_PERL); do perl -MCPAN -e "install \"$$m\";"; done
+
+# ------------------------------------------------------------------
+
+# CENTOS
+install_centos_rpms:
+	yum -y install $(CENTOS)
+
+install_centos_perl:
+	for m in $(CENTOS_PERL_FORCE); do perl -MCPAN -e "CPAN::Shell->force(qw/install $$m);"; done
+	for m in $(CENTOS_PERL); do perl -MCPAN -e "install \"$$m\";"; done
+	for m in $(CENTOS_PERL_VERSION); do perl -MCPAN -e "CPAN::Shell->install \"$$m\";"; done
+	for m in $(CENTOS_PERL_NOTEST); do perl -MCPAN -e "CPAN::Shell->notest('install', \"$$m\";"; done
+	for m in $(CENTOS_PERL_LOCAL); do LD_LIBRARY_PATH=/usr/local/lib:/usr/lib:/lib perl -MCPAN -e "install \"$$m\";"; done
+
+# We need to add /usr/local/lib to the ldconfig list of directories on CentOS,
+# if it is not already there
+create_ld_local:
+	if [ "$$(ldconfig -v 2> /dev/null | grep '^/usr/local/lib' | wc -l)" -eq 0 ]; then \
+		echo '/usr/local/lib' > /etc/ld.so.conf.d/local.conf; \
+		ldconfig; \
+	fi;
+
+# vim:noet:sw=4:ts=4:

More information about the opensrf-commits mailing list