[OPEN-ILS-DEV] Startup errors
Hennie Rautenbach
hennie at sabinet.co.za
Mon Jun 4 09:39:58 EDT 2007
Don McMorris wrote:
> If you can check your config for ejabberd (or whatever jabber server
> you're using) just to confirm what this setting is, we might get to
> this issue...
Here is the contents of my /etc/ejabberd.cfg file:
% Default Debian ejabberd.cfg
%override_acls.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% ucf section
%% Admin user
{acl, admin, {user, "evergreen", "leo.sabinet.co.za"}}.
{acl, admin, {user, "router", "leo.sabinet.co.za"}}.
%% Hostname
{hosts, ["localhost", "leo.sabinet.co.za"]}.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Users that have admin access. Add line like one of the following
after you
% will be successfully registered on server to get admin access:
%{acl, admin, {user, "aleksey"}}.
% Blocked users:
%{acl, blocked, {user, "test"}}.
% Local users:
{acl, local, {user_regexp, ""}}.
% Another examples of ACLs:
%{acl, jabberorg, {server, "jabber.org"}}.
%{acl, evergreen, {server, "leo.sabinet.co.za"}}.
%{acl, router, {server, "leo.sabinet.co.za"}}.
%{acl, aleksey, {user, "aleksey", "jabber.ru"}}.
%{acl, test, {user_regexp, "^test"}}.
%{acl, test, {user_glob, "test*"}}.
% Everybody can create pubsub nodes
{access, pubsub_createnode, [{allow, all}]}.
% Only admins can use configuration interface:
{access, configure, [{allow, admin}]}.
% Every username can be registered via in-band registration:
{access, register, [{allow, all}]}.
% None username can be registered via in-band registration:
%{access, register, [{deny, all}]}.
% After successful registration user will get message with following subject
% and body:
{welcome_message,
{"Welcome!",
"Welcome to Debian Jabber Service. "
"For information about Jabber visit http://jabber.org"}}.
% Replace them with 'none' if you don't want to send such message:
%{welcome_message, none}.
% List of people who will get notifications about registered users
%{registration_watchers, ["admin1 at localhost",
% "admin2 at localhost"]}.
% Only admins can send announcement messages:
{access, announce, [{allow, admin}]}.
% Only non-blocked users can use c2s connections:
{access, c2s, [{deny, blocked},
{allow, all}]}.
% Set shaper with name "normal" to limit traffic speed to 1000B/s
{shaper, normal, {maxrate, 500000}}.
% Set shaper with name "fast" to limit traffic speed to 50000B/s
{shaper, fast, {maxrate, 500000}}.
% For all users except admins used "normal" shaper
{access, c2s_shaper, [{none, admin},
{normal, all}]}.
% For all S2S connections used "fast" shaper
{access, s2s_shaper, [{fast, all}]}.
% Admins of this server are also admins of MUC service:
{access, muc_admin, [{allow, admin}]}.
% All users are allowed to use MUC service:
{access, muc, [{allow, all}]}.
% This rule allows access only for local users:
{access, local, [{allow, local}]}.
% Authentication method. If you want to use internal user base, then use
% this line:
{auth_method, internal}.
% For LDAP authentication use these lines instead of above one:
%{auth_method, ldap}.
%{ldap_servers, ["localhost"]}. % List of LDAP servers
%{ldap_uidattr, "uid"}. % LDAP attribute that holds user ID
%{ldap_base, "dc=example,dc=com"}. % Search base of LDAP directory
%{ldap_rootdn, "dc=example,dc=com"}. % LDAP manager
%{ldap_password, "******"}. % Password to LDAP manager
% For authentication via external script use the following:
%{auth_method, external}.
%{extauth_program, "/path/to/authentication/script"}.
% For authentication via ODBC use the following:
%{auth_method, odbc}.
%{odbc_server, "DSN=ejabberd;UID=ejabberd;PWD=ejabberd"}.
%% Anonymous login support:
%% auth_method: anonymous
%% anonymous_protocol: sasl_anon|login_anon|both
%% allow_multiple_connections: true|false
%%{host_config, "public.example.org", [{auth_method, anonymous},
%% {allow_multiple_connections, false},
%% {anonymous_protocol, sasl_anon}]}.
%% To use both anonymous and internal authentication:
%%{host_config, "public.example.org", [{auth_method, [anonymous,
internal]}]}.
% Host(s) name: (replace for your hostname(s))
% Old {host, "localhost"}. option is equivalent to {hosts, ["localhost"]}.
%{hosts, ["localhost"]}.
%% Define the maximum number of time a single user is allowed to connect:
{max_user_sessions, 1000}.
% Default language for server messages
{language, "en"}.
% Listened ports:
{listen,
% Ordinary client-2-server service
[{5222, ejabberd_c2s, [{access, c2s},
{max_stanza_size, 2000000},
starttls, {certfile,
"/etc/ejabberd/ejabberd.pem"},
{shaper, c2s_shaper}]},
% SSL-enabled client-2-server service
{5223, ejabberd_c2s, [{access, c2s},
{max_stanza_size, 2000000},
tls, {certfile, "/etc/ejabberd/ejabberd.pem"},
{shaper, c2s_shaper}]},
% Server-2-server service
{5269, ejabberd_s2s_in, [{shaper, s2s_shaper},
{max_stanza_size, 2000000}]},
% External MUC jabber-muc (but internal mod_muc is better :))
% {5554, ejabberd_service, [{ip, {127, 0, 0, 1}},
% {access, all},
% {host, "muc.localhost", [{password,
"secret"}]}]},
% Jabber ICQ Transport
% {5555, ejabberd_service, [{ip, {127, 0, 0, 1}},
% {access, all},
% {hosts, ["icq.localhost", "sms.localhost"],
[{password, "secret"}]}]},
% AIM Transport
% {5556, ejabberd_service, [{ip, {127, 0, 0, 1}},
% {access, all},
% {host, "aim.localhost", [{password,
"secret"}]}]},
% MSN Transport
% {5557, ejabberd_service, [{ip, {127, 0, 0, 1}},
% {access, all},
% {host, "msn.localhost", [{password,
"secret"}]}]},
% Yahoo! Transport
% {5558, ejabberd_service, [{ip, {127, 0, 0, 1}},
% {access, all},
% {host, "yahoo.localhost", [{password,
"secret"}]}]},
% External JUD (internal is more powerful,
% but doesn't allow to register users from other servers)
% {5559, ejabberd_service, [{ip, {127, 0, 0, 1}},
% {access, all},
% {host, "jud.localhost", [{password,
"secret"}]}]},
% HTTP service (You may choose options HTTP-polling and Web-administering)
% When commenting out, be careful with commas
{5280, ejabberd_http, [http_poll, web_admin]}
]}.
% Use STARTTLS+Dialback for S2S connections
{s2s_use_starttls, true}.
{s2s_certfile, "/etc/ejabberd/ejabberd.pem"}.
%{domain_certfile, "example.org", "/etc/ejabberd/example_org.pem"}.
%{domain_certfile, "example.com", "/etc/ejabberd/example_com.pem"}.
% If SRV lookup fails, then port 5269 is used to communicate with remote
server
{outgoing_s2s_port, 5269}.
% Used modules:
{modules,
[
{mod_adhoc, []},
{mod_announce, [{access, announce}]}, % Depends on mod_adhoc
{mod_register, [{access, register}]},
{mod_roster, []},
{mod_privacy, []},
{mod_configure, []}, % Depends on mod_adhoc
{mod_configure2, []},
{mod_disco, [{extra_domains, ["users.jabber.org"]}]},
{mod_stats, []},
{mod_vcard, []},
% {mod_offline, []},
{mod_echo, []},
{mod_private, []},
{mod_irc, []},
% Default options for mod_muc:
% host: "conference." ++ ?MYNAME
% access: all
% access_create: all
% access_admin: none (only room creator has owner privileges)
{mod_muc, [{access, muc},
{access_create, muc},
{access_admin, muc_admin}]},
% {mod_muc_log, []},
% {mod_shared_roster, []},
{mod_pubsub, [{access_createnode, pubsub_createnode}]},
{mod_time, []},
{mod_last, []},
{mod_version, []}
]}.
% vim:set ft=erlang:
% Local Variables:
% mode: erlang
% End:
--------------------------------------------------------------------------------
This transmission is for the intended addressee only and is confidential
information. If you have received this transmission in error, please
delete it and notify the sender. The contents of this e-mail are the
opinion of the writer only and are not endorsed by Sabinet Online
Limited unless expressly stated otherwise.
--------------------------------------------------------------------------------
More information about the Open-ils-dev
mailing list